The Nissan Path

montanacruiser

I ended up getting a code and it was the po340 . So Camshaft position sensor on bank 1 passenger side. Does anyone know the OEM part number? I look it up and I am getting two different numbers. 23731-6J90D 23731-6J906
Thanks

montanacruiser

Hi all hope you all can help me out a little. I have a 2005 pathfinder. I have been having this issue where the truck will just die all of a sudden. Also have longer than normal cranks to start. From the research I have done it looks like I may have a bad Camshaft position sensor. Unfortunately I ha...

montanacruiser

Hi all my shifting handle has crome on it and it is starting to peel up and is very sharp. I wanted to replace it if possible if I remove the old one and replace with this https://www.ebay.com/itm/153884917497?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=15388...

montanacruiser

Thanks i really appreciate it. I am just going to do the Moog and kyb. Hopefully it goes smooth. Again i really appreciate you taking the time to respond.

montanacruiser

The pathfinder is a daily driver that sees the highway every once in a while. She cant get a new rig for a while so she just wants it to look different i guess. I know its silly to lift for looks but there it is. Would keep it 2" and under. Also is there other parts i should consider changing w...

montanacruiser

My wife would just like to give it a face lift i guess. We use my truck to go up in the woods mainly. If i were to lift i would probably do the ome because i have had good luck with the brand. If i do lift from what i have read on here you have to change some bolts out? Is there a good thread or vid...

montanacruiser

Hi all looking for a little advice. I have a 2005 pathfinder that the old struts are leaking and worn out. Was going to do a front strut and spring assembly and new struts in back. Was wondering if it might be a good idea to change out the rear springs as well? Also was kinda thinking about maybe li...

montanacruiser

ended up being the rear most ujoint. Couldn't see it the first time I crawled under. Went for a drive crawled under again was staring me right in the face. The ujoint was cracked but when I wiggled the drive shaft there was no play so I figured it was good but it wasn't.

montanacruiser

I have a vibration when I am accelerating or while I am holding the gas. Goes away when I let off the gas. Tires have been balanced. Any ideas?

montanacruiser

So how about the after market catalytic convertes? Any good ones that you guys have tried?

montanacruiser

The pathfinder has less than 80,000 on it will this be under warranty or is there a time limit?

montanacruiser

Hi all I have a 2005 pathfinder its showing bank 1 p0420. I was wondering what a good after market o2 sensor would be? And also if that doesn't fix it what is a good after market catalytic converter?
Thanks

montanacruiser

Nice thanks. I called the dealer here in town and the don't even know the part # for the bad radiator! You would think that they would know this and let people know what to do about it before it becomes a problem. They said that they have had a bunch in for the trans problem but put no effort into p...

montanacruiser

Hi all I bought a used 2005 pathfinder. It has 68000 on it. I looked at the part # of the radiator and it is 21460 ea265. Is this the bad one or is mine replaced? Any help would be appreciated. Thanks

Search found 14 matches

Re: Camshaft position sensor

Camshaft position sensor

Shift handle

Installing new suspention

vibration while accelerating

looking for the right parts

Is this the bad radiator part #

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums