The Nissan Path

RDCE

Well, after a few days of poking around I managed to solve this one on my own. There is a small 1/2" diameter grommet located to the lower right of the brake booster which, on the interior, exits to the upper left of the brake pedal. (Some of the sound proofing mat needs to be moved aside to ac...

RDCE

Hi Everyone, without going into too much detail, I am having issue with the tow harness on my '07 LE after having it function well for the last 5 months since installing the brake relay and 7-blade connector. I have a Triflex brake controller from CURT and have talked to their Tech department. We ha...

RDCE

My "new to me" 07 LE in Cloud White is doing this too. I ordered some Duplicolor spray touch up paint but figure in the long run it will end up cracking again because of the joint movement with temp changes. I know everyone has been talking about bedliner but I didn't see any mention of Pl...

RDCE

Hmmm, interesting. I didn't think that method would work as I even had a bit of a challenge getting the blank out from the back. Because I was after the middle console blank I would have lost it into the innards of the console doing it that way. The new one also needs to be placed into the frame fro...

RDCE

Ok, figured it out thanks to this guy!

https://www.youtube.com/watch?v=xwALGobz4cc

And, these blanks have to be removed from the back. They won't pull forward! Don't use a butter knife.

RDCE

Ok, figured it out thanks to this guy!

https://www.youtube.com/watch?v=xwALGobz4cc

RDCE

Hey, would you happen to be able to enlighten me as to how you got the blank out? Did you have to disassemble the whole console?

RDCE

Hi everyone, I have a '07 Pathy that is "new to me" with a switch blank that the previous owner had a light or toggle switch in. Now the blank has a 1/4" hole in it. I ordered a new blank but can't figure out how to remove the old one. I tried a little prying with a flat head with no ...

RDCE

Thanks! I was thinking this afternoon that I might try to make a "bead" on the edge to give it a little more stability and to try to contain more of the spray. Being heat mold-able I'm gonna give it a try with my heat gun and laminate roller while clamping the ABS to my work bench. Will po...

RDCE

Hi All, new here. Just picked up an '07 LE with 95k mi. I am looking to upgrade tires soon as it came with winters on it and there's not much snow around here. When I do, I wanna go a little taller and a little wider like I did on my '01 Xterra. Problem is, currently there are no flaps on the Pathy ...

Search found 10 matches

Tow Harness/Firewall

Console switch blank removal

Fender flares/flaps

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums