The Nissan Path

mic209

Thank you! Iâ€™m more interested in how to remove the plastic panels around the bottom of the seat. The rest is straightforward.

mic209

My 2008 SE has the classic wear spot on the left side of the drivers seat. I was able to get a good deal on a replacement OEM cover. Is there any instructions on how to disassemble the seat?

mic209

Check out my instagram, @dibofarrell I have everything you need to know about armada springs on the path. Over a year later and I finally requested you on IG, this weekend I'm finally doing the front rancho quick lift and rear Moog armada springs. I've had the parts sitting in my garage since last ...

mic209

Are these still available?

mic209

You can get offset bushings to help with the alignment. Do you have the part number for the bushings? SuperPro SPF3977K Here's the link: http://www.suspension.com/spf3977k Thank You, what about the front alignment, going with Rancho quick lift loaded. Can I use any off the shelf camber bolts? Or do...

mic209

Yes. I got mine from Autozone for $141.99 (2007 year) the pair lifetime warranty. After about a month they are still about 2.5 inches higher than previously. Only issue I am now having is getting the rear alignment back into specs. Also I can load the rear cargo without it sagging. You can get offs...

mic209

Hi. I think this is an extra post to your prevous post. I orderd mine from autozone Part : CS81085 With tape measurer before I was at 34.5,now 37 inches There was a post a while back showing armada springs from I think AC Delco for around $40 + shipping. When comparing the pathfinder to the armada ...

mic209

Yes. I got mine from Autozone for $141.99 (2007 year) the pair lifetime warranty. After about a month they are still about 2.5 inches higher than previously. Only issue I am now having is getting the rear alignment back into specs. Also I can load the rear cargo without it sagging. Thanks Bulldozer!

mic209

Been reading and searching on the forums and iâ€™m still confused, do armada Rear Springs provide lift or just stiffen up the ride? Are the moog 81119 armada Springs? How much lift do they provide?

mic209

Will armada rear springs provide any lift on an 08 SE 4x4?

mic209

I'm looking to do a leveling kit on my 2008 V6 SE pathfinder, I just recently replaced all 4 corners with new bilstein 4600 shocks/struts (was my wife's daily driver up until a couple months ago and she didn't want a lift), how would the 4x4parts HD rear springs work with the bilstein 4600? I'm hopi...

mic209

@SMJ999SMJ thanks for your help I was able to swap plugs without removing the upper IM. Just like you said, a good assortment of extensions and universals is all you need. Took me about 2 hours, which included a drive belt change and air filter change. My 2008 had the DILFR5A-11's installed, but I r...

mic209

Just be careful not to overtorque them, but you should be alright. You don't have to remove the upper intake plenum to replace the plugs. You'll need a good assortment of 1/4" and 3/8" drive extensions, universals and a reducer. Four of the plugs are easy to get to; it's the front two on ...

mic209

I just ordered a set of plugs for my 08 V6 as it is at 97,000 miles. Do you guys think I'll be okay re-installing the upper IM without a torque wrench? I just don't want any air leaks from the bolts not all having equal torque.

Search found 14 matches

driver seat disassembly?

Do Armada Rear Springs Provide Lift?

Armada Rear Spring?

HD Rear Springs with Bilstein 4600.

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums