The Nissan Path

Phiakong

The vibration "could" be the other U-joint, even if there is no play (it could be rusted and binding up). Out of balance wheels, bent wheels and/or bad tires can also cause this. You could try rotating the tires front to rear to see if the vibration changes at all or goes away. If so, hav...

Phiakong

Hello everyone, OK...Its been awhile since Ive been on here so I hope this is the right thread to post this. If not please lmk so I can post in the right thread. Ive searched a lot and there are so many solution but I think this one is slightly different I started to get this excessive front end vib...

Phiakong

I have the camber bolts for the front but damn those bolts are a pain to get out. That's why I just wanna leave it because I'm taking my pathfinder to the shop for an alignment.

Phiakong

Is it necessary to install camber bolts up front with a 2 inch lift?

Phiakong

I never had experience of drive bigger vehicle with wider tires on snow before so I did not know. It makes sense though. Yes it is almost impossible to control when driving on snow with these wide tires.

I will get a alignment done and post up some numbers

Phiakong

I haven't got a alignment yet. Is it recommended? I can't really tell how Much the tires wore out because I only had it for 8 months plus I hardly drive my pathfinder (48 miles total to work and back home everyday).

Phiakong

Hello everyone. its been almost a year since I had lifted my pathfinder with rancho quick lift 2 inch and spacers in the rear. I also have airlifts (annoying they still make noise when I go over bumps). I have on a set of 17s with 33s, tires are Hankook dynapro atm. This really bothers me but is it ...

Phiakong

for the spacer I know it goes on top of the air bag but does it really matter which way the spacer/protector direction it goes? because on the instruction it says it can be install either direction.

Phiakong

I looked and felt under the air bag and it doesn't seem like theres anything that is rubber against the bottom. although both sides look different (funny) from each other. like one is leaning at a angle more then the other. Ill take some pictures and post it up tomorrow. also I recently install some...

Phiakong

i did try one thing and it kinda eliminated some of the noise. instead of having the air bags all the way at the bottom of the coil I pushed the air bag up closer to the top and inflated the air bags to 35 psi. then dropped the jack and now it doesn't have excessive loud creak noises. I can still he...

Phiakong

When first I install it i had it at 35psi and drove it around for a day then I deflated to 15 psi for a week. The noise continue so I brought it down to 0 psi and still makes the noise now I'm at 12 psi

Phiakong

I checked the air lift spacers and they look good. Nothing is off I pretty much followed the direction on the instruction. The noise is driving me insane I might just take it off

Phiakong

the spacer on top of the air bags or the rancho spacers?

Phiakong

how come mines are so noisy and loud like its creaky

Phiakong

are air lift 1000 bags are suppose to be noisy?

Search found 22 matches

help with vibration, rough engine start

Camber bolts

suspension traction alignment help

air lift

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums