The Nissan Path

Gottcha86

I'm going to run mine at 20 psi for a few days and adjust from there.

Gottcha86

Thanks for the write up and the pictures!!! I also followed this except I didn't make a bracket for the air valves just put them in the rear bumper under neath.

Gottcha86

funny you say that i'm going to be installing the airlift system in a few minutes. My jack broke on my while doing the springs and i just ran out and bought a new one. Ok two hours of slow work installing the airlift 1000 and it does really help the rear out and at 20 psi it gives it an inch of lift...

Gottcha86

Just a heads up if your do change the whole control arm buy new bolts and nut and be prepared to cut out the old bolts. They WILL be seized in the bushing and will be required to be cut out or torched out.

Gottcha86

just replaced mine last weekend on my 2006 LE. Both were broken just like yours. 160,000 on them. I have a friend that works at Nissan and he said it is very common.

https://photos.google.com/photo/AF1QipO ... b4v2XGOmMG

Gottcha86

Not say that wouldn't be upsetting to get mismatched parts but from what I can see the ball joint is still sealed.... hard to tell even after zooming in on the pic. just the boot is a lot smaller and compact. Why are you just buying the ball joint and not the entire control arm? I found it necessary...

Gottcha86

OLD [/img] https://lh3.googleusercontent.com/JHZMasZrxXujt2LVy8cvaxvO9-tOtaSuepxw88r7t9Q2KW55_0ViUfwbWvNvB9xDdWhC23OM7jNJIl3JPZkKQFqRLMW88i7Mrsjjz_ZiMULFVm_LpoIAnZ7sRdPA3epApPj51VTyt7B1wAls0l52gWKGJuh4Y3T_WAdZTeZ04SJbo0YUFU-Z9LK88BnSVy0DiS6vmImTI-nl2BoPym0HLqJUYffMPtHiz3agsO0kudgjVZmWTJJR-EAMvYDOcTc...

Gottcha86

the grill is chrome (brand new never used) and i'm located in Wisconsin.
$140.00 plus shipping

Gottcha86

i can't seem to answer my PMs so to answer the last question Yes i still have the grill.

Gottcha86

how about best offer with in reason.

Gottcha86

I have a new complete billet grill (3 piece set) and hardware for a 2008-2012 pathfinder P#21761 for $160.00 Plus shipping unless your local and can pick up. I added the exact product link at the bottom of the page. https://photos.google.com/photo/AF1QipOSW6-4_1WDZXOZeRO5ue99qBbdknaBEyZ1BA5m https:/...

Gottcha86

I recently installed the power stop drilled and vented front brakes on my 2006 and I'm not really impressed with them. The stopping distance seems to have increased. But the reason I bought them was due to warping rotors so as long as they stay true I'll buy them again. One thought I had is to use t...

Gottcha86

Had the same thing happen to my 2006 except mine would stick at 1/4 tank after a fill up. Nissan replaced the sending unit and that didn't do it so I had them replace the tank and it has worked ever since. The mechanic said something about the tanks being slightly different.

Gottcha86

If it's stuck in the middle then it's probably not a loose nut on the wiper arm. My quit working a few years ago and turned out the nut just came loose. The motor was turning g but the wiper didn't move.

Gottcha86

The part cost 30 bucks from nissan and takes all of 20 minutes to install. I have a 2006 pathfinder and the warenty was almost up when mine went out.

Search found 33 matches

21761 billet grill 2008-2012 pathfinder

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums