The Nissan Path

BigEz

Good luck. I've got a few at low speed on city streets. I've tried jumping up and down on suspension, but it's quiet. More of a high chip(s) on surfaces like broken concrete at low speed. I read a post a while back about the body mounts.. Rubber with a iron core, that can rub. Did not look easy!!.. ...

BigEz

I figured it out. Double click unlock, and on the third tap hold. It fired right up. Just made my day! Thanks for all the help interesting thread. I tried the "Double click unlock, and on the third tap hold" and it just lowered my windows (which I knew I had).. then about 20 more combinat...

BigEz

Came across this link from another discussion... might help lead you to the correct item. http://www.nicoclub.com/FSM/Pathfinder/2008_Pathfinder/se.pdf Ohh.. and this: http://www.nicoclub.com/FSM/Pathfinder/recalls/NTB09-001%20-%20VOLUNTARY%20RECALL%20CAMPAIGN%202005%20-%202009%20FRONTIER,%20XTERRA,...

BigEz

Wow.. what a nightmare. Sorry man. But you know your noise is somewhere else, and hopefully the ability to make adjustments will be worth the change?

The change-out photos are great.

BigEz

You guys are amazing with the data you have or can produce. More than I can grasp at times.. Thanks I going to watch to see if I can feel anything at the 20C event, but it gets there very quick down here. I'm more concerned about the 80C event, as I do not get above 68C unless towing, since doing th...

BigEz

I just added the Stampede bug deflector, about $40 on Amazon. It went on easy enough (8 screws, no drilling) and seems very solid. But I'm not sure I like how much it flairs up. Will wait for a rainy day to see how it deflects, but may sell it and go to the Nissan OME version that has a lower profil...

BigEz

That function is related to the TCM, and tranny fluid temp sensor, not the engine coolant temperature. Both my Maxima and Pathfinder do the same thing when it's chilly out. Do you know what trans temp that is?? It's only gone down to about 22deg here, and I have not noticed it on those mornings und...

BigEz

ThePainClinic wrote: So, the 40410 will only increase idle up and the 40415 will both increase or decrease idle?

I do not know about the 40415.. but I don't think either will let you adust idle down? But for sure, the 40410 will only adjust up.

BigEz

I have the BDGT: 50-State GT Gas (40410) which just means Californa legal. There are a few differences, i looked it up once, but don't remember all of them. But you can increase your idle RPM Up, just not Down. You can also advance your timing. I'm curious if the Bully Dog tuner, or any other tuner ...

BigEz

93 here... I'm running Bullydog's "Performance" tune and I have advanced my timing an additional 2 degrees, so all I have used is 93 octane, except the few times where 91 was all that was available. I drive about 250 miles a week, almost all @ 70mph on highway. I have been getting about 16...

BigEz

Yea, I like the look without it.. and more airflow. I've run my last two vehicles without it, and have been lucky not to get a ticket... even when ticketed for speeding. I do carry the front plate, with the "plan" to say, "Yes officer, I just removed it because a screw fell out.. I'll...

BigEz

I didn't install the bull bar, the body shop put it on from when I got in an accident. But I think they used the factory mount, Looks to me as if they held the plate half way up the factory location and just drilled 2 screws threw the bottom holes of the plate. Hope that makes sense. Yes, makes sen...

BigEz

Looking good. I have the same bull bar as you but mine is all chrome, did yours come with the black tube? Yes, I knew I wanted the tube to have bed liner and I figured it would be easier to spray the factory black. I'm not a big fan of the factory powder coat black... too shinny. I like the flatter...

BigEz

A buddy of mine gave me some industrial spray he used as a bed-liner a few years ago, and the stuff really tuff. So I decided to do my wheel wells. I only got to the rear, as it got too cold! Both for me and the spray. Stuff dries really hard, but can be heated and cut. More like a rubberized epoxy....

BigEz

that sucks.. well hopefully the ranchos last longer. I'm happy with how the ranchos ride , but it took a while to get them right. I do not like the plastic knob on the ranchos, though. they can be a bit stiff to turn and knobs seem a little weak.

Search found 130 matches

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums