Search found 22 matches

Return to Search

by skifiddle
Thu Oct 21, 2010 10:28 am
Forum: 1996-2004 Pathfinder (R50)
Topic: Help - Body Roll & Sway
Replies: 13
Views: 18080

I have 4x4parts.com bushings and bolts. $100 for lower arms. Bolts were in a set for 4 arms, so I got the bushings. If the lowers do it, I might save the other set and do someone else's for $. I am going to drill some holes through the old bushings, experiment a little with a sawzall, etc, and then ...
by skifiddle
Thu Oct 21, 2010 10:17 am
Forum: 1996-2004 Pathfinder (R50)
Topic: Help: Won't start until completely cool
Replies: 2
Views: 2762

Too late for you. But for others - water temp sensor did that on a Honda. Would quit when coming to a stop (idle) when warm. Put in water with a thermometer and ohmmeter to test.
by skifiddle
Thu Oct 21, 2010 9:53 am
Forum: 1996-2004 Pathfinder (R50)
Topic: Gas mileage?
Replies: 15
Views: 14487

I drive slower than you guys, I guess. I get 20.x mpg on the highway at 67 mph and 57 on secondaries. That would be 320 miles from a 21 gal tank leaving 4 gal reserve. That is getting to middle of the E mark. I am going to carry a gas can to see if my light works someday. Bought 98SE AT with 98K and...
by skifiddle
Thu Oct 21, 2010 8:58 am
Forum: 1996-2004 Pathfinder (R50)
Topic: New Owner with some water problems. Please help.
Replies: 3
Views: 3272

Close the door onto a strip of paper and then pull it out. You should have resistance. Repeat along your doors. The doors and tailgate may have been in an accident and not adjusted right. I have not needed to adjust any on a Pathy yet, but vehicle latches and many hinges are adjustable. Look around ...
by skifiddle
Thu Oct 21, 2010 8:47 am
Forum: 1996-2004 Pathfinder (R50)
Topic: 2001 Door Seal // Attachment Plugs
Replies: 2
Views: 2475

Weatherstrip adhesive? I would try that first.
by skifiddle
Tue Oct 19, 2010 12:15 pm
Forum: 1996-2004 Pathfinder (R50)
Topic: How to remove running boards
Replies: 4
Views: 5965

I left the bolts and torched off as much as I could of brackets. Sawzall would have been 2nd choice.
by skifiddle
Tue Oct 19, 2010 12:12 pm
Forum: 1996-2004 Pathfinder (R50)
Topic: How do i remove 2000 pathfinder 3.3L crank pulley?
Replies: 1
Views: 4069

My 98 has two jack screw holes tapped through. I would guess 6mm. I am going to measure. 2-1/2 in long to reach into pulley. I thought they were for a puller but then it started off when I was lubing the holes. Just like some brake drums. I have an AT. I tightened by belts to where I couldn't wiggle...

Go to advanced search