The Nissan Path

TooTallMike

Did a lift and fixed a squeaking spring on the parking brake shoes and they came on. Bought an ABS reader and it says it's not equipped on my vehicle. Brake fluid is at Max and never had issues with the VDC before.

TooTallMike

Anyone who's installed the rear UCA eccentric bushings know if there is specific way you put them in? Like what direction the cam inside the bushing is supposed to face

TooTallMike

I'm sorry if this is a super noob question but I'm lifting the front and bought a set of bolts that's required to help keep the alignment in spec. However, where do you install them?? Lower and upper control arms? Because when I get underneath I counted 4 total for each side that can take the bolts....

TooTallMike

Hate to revive this but how is it possible for the noise to come back??? Changed the chains and used oem tensioner shoes.

TooTallMike

Your guess is as good as mine. I'm a newbie to this realm. Hopefully they come with clear instructions or someone else who knows about it or has had experience can chime in.

TooTallMike

So I'm just better off ordering them off of 4x4 parts then.
http://www.4x4parts.com/i-22756999-rear ... hings.html

TooTallMike

So I decided to purchase these so that when I do a lift I can get everything back to spec without any issues. But after I placed th, I received an email saying that they would cancel my order because they are not for US spec R51's http://superpro.suspension.parts/spf3977k Did I misread all the posts...

TooTallMike

Update! And in conclusion. Timing chain guides are replaced and new chains. Everything is good to go Never ever ever ever ever ever ever ever ever ever ever ever ever ever ever touch your TB or even look at it wrong. Dealership did the relearn through CONSULT and it cost me 130$. Idle is normal and ...

TooTallMike

Just stopped by Tacoma Nissan and they want 130$ +tax to run consult.

TooTallMike

So what should I say to the stealership? as far as to just get that done besides the bombardment of other recommended services or parts I'm sure they'll tell me I need. Lol

TooTallMike

Well that rules it out thanks ! So I met the parameters and conducted the relearn and the code hasn't come back. However the idle remains at about 950-977. For a start up it dropped to 725 and I thought it was good to go but on the next start up it went right back up but still no code.

TooTallMike

Could my timing be off by a tooth?

TooTallMike

I did multiple times and erased the codes and it still idles at 950. Unless I'm performing it wrong? I used a YouTube vid for an 06 Murano .

TooTallMike

All together and I got a p0507 code and it won't clear. Cleaned the TB and changed the pcv valve. The pcv breather hose is hard as a rock and could possibly be cracked thus causing hi idle? Hellppp

TooTallMike

Update!!! Knocking out the timing chain guides and ran into a problem with finding tdc. I was referencing a YouTube vid and trying to go off the marks to save time and almost destroyed the entire operation. Luckily got it back on track and lined it all up. Wasted a few hours trying to line it back u...

Search found 67 matches

VDC OFF SLIP light solid.

Am I missing something?

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums