The Nissan Path

heckler40

LE build 4/2010

heckler40

I got the 9416K148 @ 200lbs. These threads are fine and will NOT match the stock ends. So, I also ordered QTY 4 9416K76. 15 minutes and works amazing!

heckler40

And if you are disconnecting the end links, might as well do the bushings. If you do and you have a lot of miles (things are rusted), buy new hardware/bolts, etc.

heckler40

Initial follow up... Decided to do wheel bearings, front struts (keeping stock springs), sway bar end links and bushings. Started Saturday and it's Monday. Long story short - Lots of effort to get all the bolts out. Broke one of the sway bar bushing bolts and will take it to Nissan to drill out hope...

heckler40

Looks like it. Would recommend getting the updated Nissan part. Takes <1 week to get it.

heckler40

Noticed this noise about 2 weeks ago and it's getting louder. It's a whirrrrrrrr noise that has a 1:1 rate increase/decrease with speed so I'm guessing wheel bearing or u joint. It's loudest between 40-55mph. There are vibrations in the steering wheel, gear selector and floor boards although "s...

heckler40

In case you weren't able to tell mine are the laser iridiums. They were in good condition and could have gone longer (which appears to be the general consensus here).

heckler40

I had this issue on my 2010 and the sensor was full of dust. Vacuumed it off and now have heat.

heckler40

Took a closer look and the muffler is leaking moisture on the back side at the seam. No hole. Now, what to do: 1) replace muffler and related hardware with Nissan OE 2) replace muffler, rear tube and related hardware with Nissan OE 3) replace cat back with Walker and related hardware 4) Don't worry ...

heckler40

I took a loot at Courtesy and Nissanpartsdeal and the tubes and muffler not including bolts and things is about $1500. Really wasn't expecting that. So, I'll continue to look around maybe some local shops.

heckler40

Thanks. Should have said stock and have the V6. I'm looking for something to last another 100k miles and would prefer the stainless.

heckler40

What are people doing for OE cat-back exhaust replacement? I have a couple leaks and it's about time.

Not interested in aftermarket/performance based systems.

heckler40

Please post them!

heckler40

Just did this and I would like to share what the plugs looked like. Overall, they look good. No missing parts. Great job on NGK and Nissan for selecting them.

https://www.dropbox.com/s/5q0mxkjafa2hy ... k.jpg?dl=0

heckler40

Took a break. I was stressing, overthinking and getting tunnel vision.

Went back and found a loose harness on the back of the intake more towards driver side. Didn't look it up but assume it's a fuel injector. Thanks for all the input.

Search found 86 matches

Let's Play: Guess This Noise

Exhaust Replacement

Replaced Plugs at 112k

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums