2005 factory fog lights????

Member postings to buy/sell anything, from parts to full automobiles. Commercial vendors, ask the Admins first for permission to post.

Moderator: volvite

SKIPJACK
Posts: 25
Joined: Tue Dec 19, 2006 12:12 pm
Location: York, PA

2005 factory fog lights????

Postby SKIPJACK » Tue Dec 19, 2006 12:21 pm

im looking to buy fog lights for my pathfinder b/c it didnt come with them so if anyone could tell me where i could find them i'd appreciate it


boogyman
Posts: 519
Joined: Tue Jul 04, 2006 6:04 am
Location: Jersey

Postby boogyman » Tue Dec 19, 2006 2:10 pm

If you want nissan go here: http://www.courtesyparts.com/ They usually have all the standard stuff, plus they are very good on their prices.

If you want aftermarket http://www.piaa.com/Lamps/Lamps-General.html is a good choice

Do you have a brush bar to mount or are you using the existing holes?

SKIPJACK
Posts: 25
Joined: Tue Dec 19, 2006 12:12 pm
Location: York, PA

Postby SKIPJACK » Wed Dec 20, 2006 4:46 pm

i want to use the existing holes right now it has those gray caps in them instead of fog lights and it just looks not good

SKIPJACK
Posts: 25
Joined: Tue Dec 19, 2006 12:12 pm
Location: York, PA

Postby SKIPJACK » Wed Dec 20, 2006 4:48 pm

thanks for that website thats exactly what i was looking for i really appreciate it....

User avatar
sbs0518
Posts: 11
Joined: Mon Jun 04, 2007 7:04 pm
Location: Lakehurst, NJ

Fog Light Question

Postby sbs0518 » Tue Aug 07, 2007 6:57 pm

Skipjack, I have the same problem. Did you get the fog light kit from Courtesy and if so, was all the wiring in-place? Was it difficult to install?

Thanks,

SKIPJACK
Posts: 25
Joined: Tue Dec 19, 2006 12:12 pm
Location: York, PA

Postby SKIPJACK » Wed Aug 08, 2007 4:38 pm

all the wiring is there you just need to get the fog lamp switch from a nissan dealer.. what i did was bought a set of fog lights on ebay from blinglights.com and used the existing wires and rigged up a switch to operate them. it wasnt too hard

User avatar
sbs0518
Posts: 11
Joined: Mon Jun 04, 2007 7:04 pm
Location: Lakehurst, NJ

OK Cool

Postby sbs0518 » Wed Aug 08, 2007 7:27 pm

Thanks for the info. That shouldn't be to hard. I have yet to get down there and take a good look at the wiring and what is entailed.

Take care,


Return to “Classifieds for Pathfinders and Pathfinder Accessories”