Needing stock Alloy's info to get Steel's offset right.

Anything relating to Wheels, Tires, and Brake options and upgrades...

Moderator: volvite

gadget1382
Posts: 19
Joined: Mon Jun 27, 2011 8:55 pm

Needing stock Alloy's info to get Steel's offset right.

Postby gadget1382 » Mon Nov 07, 2011 7:12 pm

Ok, so I can have a responcible set of tyres and rims and then a weekend offroad set, I need to find a durable and or cheap (relative) set. :twisted:

We get the 6x114.3 stud pattern (or 4.5" imperial). That's fine, it's the same as the Navara and a few others around now, but the offset is different. My issue is the offset!

Mine's the style below. 17" rim with the larger 320mm (12.6") brake rotors from factory. So 16" rims are really not an option.

Image

What offset do you guys get in the states in a 17" rim?

I have a contact I could get a stock set imported over, or will need to get a steel set sent over.

Rather not go larger than 17" as offroad tyre options are limited and not cheap! :(


basemodel
Posts: 33
Joined: Sat Aug 13, 2011 7:01 pm
Location: new baden

Postby basemodel » Tue Nov 08, 2011 2:12 pm

isn't your spare on a steel wheel?

gadget1382
Posts: 19
Joined: Mon Jun 27, 2011 8:55 pm

Postby gadget1382 » Tue Nov 08, 2011 2:19 pm

Nup, it's a full sized alloy, so you can rotate spare when you do a tyre rotation.

basemodel
Posts: 33
Joined: Sat Aug 13, 2011 7:01 pm
Location: new baden

Postby basemodel » Tue Nov 08, 2011 2:37 pm

gotcha. i'm checking u.s. resources. striking out so far.

basemodel
Posts: 33
Joined: Sat Aug 13, 2011 7:01 pm
Location: new baden

Postby basemodel » Tue Nov 08, 2011 2:41 pm


gadget1382
Posts: 19
Joined: Mon Jun 27, 2011 8:55 pm

Postby gadget1382 » Tue Nov 08, 2011 2:50 pm

Cheers, will check it out at home :)
Where the work filter doesn't block the site! :x


Return to “R51 Brakes, Tires, and Wheels”