Rear Lift Springs + Airlift 1000
Moderator: volvite
-
IcedTeasley
- Posts: 178
- Joined: Fri Jul 31, 2009 10:00 pm
- Location: Lakewood, CO
Rear Lift Springs + Airlift 1000
For those of you with a lift and air bags; is there a better kit for lift springs besides the standard PF kit??
I called airlift 1000 customer support. since I have the lift kit from automotive customizers they ask me to measure the "inside" diameter and the height of the coils.
I measured mine at 5inches diameter and the the height base and top at 12inches
part #60769
If your measurments differ im sure they can refer u to a different setup
I measured mine at 5inches diameter and the the height base and top at 12inches
part #60769
If your measurments differ im sure they can refer u to a different setup
-
IcedTeasley
- Posts: 178
- Joined: Fri Jul 31, 2009 10:00 pm
- Location: Lakewood, CO
I think you're missed the point of my post. I already installed an airlift 1000 on my PF's stock suspension.
Then I lifted my Pathfinder and I wanted to know if there was a longer airbag that would better match my new, longer springs. Since no one had anything to say, I went ahead and installed the standard Pathfinder kit. It's also worth noting that since my new lift springs carry heavy loads better than stock springs. I haven't had to put any air in so far so I can't report on their effectiveness.
Then I lifted my Pathfinder and I wanted to know if there was a longer airbag that would better match my new, longer springs. Since no one had anything to say, I went ahead and installed the standard Pathfinder kit. It's also worth noting that since my new lift springs carry heavy loads better than stock springs. I haven't had to put any air in so far so I can't report on their effectiveness.
Find Your Forum!