Moderator: volvite
\
I think I paid the equivalent of $50 for the two. Unfortunately I can not give you dimensions as there is no ways I will get in there with a vernier. I can try though and see what I can measure. What are you interested in? ID, OD, height? ID and OD you can measure if you remove your strut, no tricks there. The height/thickness of the spacer is what is important. I think mine is about 1", which gives you about a 2" lift. It is made out of aluminum.CrunkmastaFunk wrote:Ok so I am down to the velocity offroad spacer and the frontier spacer. Looks like I could save about $70 with the frontier spacer, but I want to make sure that it will fit, give me enough room, and not break the second I put some weight on it. Also, Lord Farquaad, could you give me some more info about that spacer? I have a few machining shops around my hometown and Ill talk to them about possibly making it, but I always like to have a price to go in requesting and also Id like to be able to tell them some dimensions of the spacer so that I can have it done quicker