Tire Fitment of Duratracs

[dano99]

Just wondering if anyone out there is running 275/70/17 Goodyear Duratracs on a stock suspension set up. If so are there any rubbing issues? I plan on doing a 2inch lift but need the tires asap before I can do that. Cheers

Dan

[SETI20]

There's a guy in the UK running 265's and he seems to have tons of clearance left. I'm fairly sure I found several members running 275's but I don't have something hard to show you for them.

Link here

[Thupertrooper]

Im running 285/75/16 and you will have to trim inside fender plastic

[Entropy98]

Very little trimming required if you do the alignment right. I run a true 33 equivalent and have not had any issues.

[labsy]

Running 265/70-R17 Duratracs and have:
- odometer spot-on precise with real speed
- REAR almost whole inch clearance horizontaly to fenders
- FRONT half an inch clearance, which comes down to almost touching fender inlay when wheel is turned outside.
But still not rubbing with stock suspension.

[disallow]

on my 2005 SE 4x4, I've put 265/75/16 Bridgestone REV02s, and they didn't rub suspension components, but definitely rubbed the plastics at full lock. For comparison purposes:

265/70/16 (factory for my 05) - 30.6"
265/75/16 (rev02s) - 31.6"
265/70/17 (labsy) - 31.6"
275/70/17 (dano99) - 32.2" plus another 0.6" in width.

[Thupertrooper]

285/75/16 don't rub in the back
They only rub on the front with the plastic inner fender lining which can be fixed with a simple melt mod.