Moderator: volvite
Okay, I finally had some time to look at this & get some measurements. I came up with about 57" from side to side. That won't be a problem because whatever mount I have to come up with will have to customized, so I can always make it fit. The distance from the front to the back is also about 29-29.5", so it sounds like it will fit that way also. The distance across in the very back, measured to the inside of the grooves on either side is 46.5". A bit shorter, but I just don't know how that 46.5" aligns with the front 57". I'm guessing it isn't dead center, but maybe one side has a 5" indent, maybe the other 3". All in all, I think it's very workable.Jerseyparts wrote:Ok, I did some measuring this morning.
The overall length of the unit is 56 1/2 inches, and including the nubs on the ends 56 3/4 inch
Now the unit can be compressed down to about 55 Inchs 55 1/2 including the mounting nubs.
I hope this helps you.