Postby TNhunter » Sat Jan 20, 2018 10:22 pm
I finally mounted my backup camera today. I mounted it right in the middle just below (and slightly to the left) of the tailgate unlock button. I drilled 3 small holes for the bracket, and one 3/8" hole to run the wire through the tailgate. I used a small rubber grommet to line that hole. Overall I'm happy with the install.
BTW - I tapped into the reverse wire in the wiring harness right by the drivers seat in the wiring harness under the door threshold. For my 2012 Pathfinder it was the SKYBLUE wire. There were a couple of other blue (royal blue) wires in the bundle but the reverse light is the light blue wire.