Postby 1handle » Thu Jun 21, 2018 4:55 pm
Hi G2b,
Superpro, outof Australia mfgs eccentric polyurethane bushings for rear UCAs, I have a set myself. These bushings allow for additional positioning of the cam bolts. The shop that installed the bushings had a hard time removing the OEMs because of the lip that holds the bushings onto the control arm. The bushings I bought were from 4x4parts.com. There are about 3 threads containing some info on the bushings in this forum. With that said, say you buy qty. 2 from moog at $40.00 per, then install at 2 hours @ $120 per hour + 1x 4wheel alignment @ $85, so that's a total of $490, less tax. The bushings, are @ $160 for qty. 4, 2 hours labor, and alignment = $485. The latter allows for later install of a lift, in case you ever feel like installing one. The bushings can be removed, the shop just needs to be smart enough to figure out the "how to" part.