ABS Codes C1163, C1102 and C1111 all at once.

Anything relating to Wheels, Tires, and Brake options and upgrades...

Moderator: volvite

Bender
Posts: 1
Joined: Tue Mar 21, 2017 6:29 pm

ABS Codes C1163, C1102 and C1111 all at once.

Postby Bender » Tue Mar 21, 2017 6:56 pm

Last fall I was driving my 2005 4x4 to work and I noticed the antilock brake module trying to kick in around some corners. After a few minutes of this the ABS, VDC and SLIP lights illuminated. On the way home the lights were out on startup but eventually the same thing happened. This went on for a few days until the system seemed to give up and the lights remained on continuously. Over the winter, I investigated as I had time, cleaning wheel sensors and tracing wires, checking continuity etc. I finally purchased a scan tool which can read ABS codes a few weeks ago and I am getting C1163 (Steering angle sensor safe) C1102 (rear left wheel speed sensor) and C1111 (ABS motor/motor relay). Since it seems unlikely that the vehicle has 3 separate malfunctioning parts all at once, I'm guessing that 1 or 2 of the codes are being triggered by the others. Does anyone know if this is correct? And if so, which code do I start with? The 3 parts associated with these 3 codes are quite expensive and so I don't want to just start replacing them. I know the steering sensor requires Consult to properly diagnose and the speed sensor requires a special tool I do not have. The diagnosis procedure for the C1111 is simple and the result instructs me to replace the abs actuator module but I'm still not convinced this code isnt being thrown by one of the other issues or vice versa. As an extreme DIY, this is driving me crazy so any info or guidance is greatly appreciated!


User avatar
underworld1001
Posts: 328
Joined: Sun Nov 27, 2016 9:05 pm
Location: Austin, TX

Postby underworld1001 » Sat Jun 03, 2017 8:54 pm

Those same lights appeared on my dash last weekend as well as the "Brake" light when the parking brake is used. I tried reading the codes, but the lights only appear after about 5-10 seconds of driving in which my code reader can't scan (only scans when engine is off and key is on).

From reading some of the Xterra forums, most guys say that a low brake fluid level is generally the culprit. In my case it isn't since the level is normal. Not sure exactly what is tossing those codes and I'm 110% with you on not wanting to buy random parts in an attempt to fix things.

My vehicle is a 2011 with about 82,000 miles.

If anyone has any info on this it would be greatly appreciated.

Marshd313
Posts: 1
Joined: Mon Mar 11, 2019 4:46 pm

C1101 C1163

Postby Marshd313 » Mon Mar 11, 2019 4:50 pm

My ABS, VDC, and slip lights came on last week. Same codes. C1101 and C1163. Any help would also be appreciated

User avatar
smj999smj
Site Admin
Posts: 6054
Joined: Sun Jan 22, 2012 11:13 pm
Location: Prospect, VA

Re: C1101 C1163

Postby smj999smj » Mon Mar 11, 2019 9:28 pm

Marshd313 wrote:My ABS, VDC, and slip lights came on last week. Same codes. C1101 and C1163. Any help would also be appreciated
C1101 is a rear-right ABS wheel speed sensor code. See this links:

https://www.autocodes.com/uploads/nissan/NTB10-102a.pdf

https://www.autocodes.com/c1101_nissan.html

C1163 is a code for the steering wheel angle sensor. This "could" be set if the battery was disconnected or a wheel alignment was performed and the steering wheel position was not relearned. For more info:

https://www.autocodes.com/c1163_nissan.html


Return to “R51 Brakes, Tires, and Wheels”