Moderator: volvite
ok, going to upload a the picture i used for my dimensions. the holes and the size of the base plate were an exact fit when i bolted them on, and mean exact!! when it comes to the drop down "hook part" or "shackle hole" you can go nuts but i used exactly these and you can see how it worked out.HiBRiD109 wrote:Thanks guys, after reading up on RockyMtnX on the thenewx board and DiBos thread, I'm just going to make my own. Ordering the metal from Metals Depot cost me $35 shipped. Just need to find someone local to cut the shapes and holes. I'll post my results.
Are these as RH drivers side ( UK )smj999smj wrote:In case you're interested, these are the part #'s for the Nissan tow hooks:
51112-EA000 RH front tow hook
51113-EA000 LH front tow hook (discontinued)
The left hook is supposed to come with bolts, which are Nissan P/N: 081B7-2452A
I'm in the US, so it would be left hand drive. I believe the bolts were spec'd at around 100 lb/ft, but my memory is not what it used to be!Graham W wrote:Are these as RH drivers side ( UK )smj999smj wrote:In case you're interested, these are the part #'s for the Nissan tow hooks:
51112-EA000 RH front tow hook
51113-EA000 LH front tow hook (discontinued)
The left hook is supposed to come with bolts, which are Nissan P/N: 081B7-2452A
LH Passengers ( UK )
Ive got one on the N/S and after the O/S