LED - Exterior Lights

Topics related to Lights, Radio, Stereo, Headunits, Alternators...

Moderator: volvite

User avatar
Touchdown
Posts: 358
Joined: Sat Feb 04, 2012 2:45 pm
Location: Dallas Area

LED - Exterior Lights

Postby Touchdown » Tue May 02, 2017 3:18 pm

I bought some LED's a few years ago to replace my interior lights...They worked great! Now I'm looking to replace the aging bulbs on the exterior with some brighter LED's.

Does anyone have recommendations on a good vendor?
Also, what color did you go with?
I see white, red and amber as options.
Do I buy red for the taillights or will white work since the lens is red. :?

Help!


evgenk
Posts: 29
Joined: Fri Dec 21, 2012 12:38 pm
Location: Toronto, ON, Canada

Postby evgenk » Wed May 03, 2017 6:58 am

Interested to hear the answers too :)

User avatar
FLiPMaRC
Posts: 477
Joined: Mon Feb 27, 2012 1:15 pm
Location: NJ

Postby FLiPMaRC » Wed May 03, 2017 10:07 am

https://www.superbrightleds.com/vehicle ... &year=2011



You will need to add some resistors to the signal lights or else you will have the "hyper" flash problem.

http://visual.ly/4-ways-get-rid-hyper-f ... nal-lights

User avatar
DiBo
Posts: 226
Joined: Tue Sep 03, 2013 6:48 pm
Location: Millet, AB

Postby DiBo » Thu May 04, 2017 7:47 am

Good catch, nice that it's all pathy specific, seems like a good database for bulbs.

User avatar
FLiPMaRC
Posts: 477
Joined: Mon Feb 27, 2012 1:15 pm
Location: NJ

Postby FLiPMaRC » Fri May 05, 2017 7:52 am

DiBo wrote:Good catch, nice that it's all pathy specific, seems like a good database for bulbs.
:wink: http://www.osram-americas.com/en-us/app ... 76&make=81

User avatar
Touchdown
Posts: 358
Joined: Sat Feb 04, 2012 2:45 pm
Location: Dallas Area

Postby Touchdown » Tue May 09, 2017 7:18 am

Thanks for all the good info guys!!

I did not go crazy and replace every bulb...yet.
But I did buy the OSRAM LEDs front blinker/marker at O'Reilley's.
I also had to buy the load resister kit.

So $45 later, I have a LED bulb that is not as bright as the original bulb when lit up as a parking light, but is brighter then the original as a blinker. AND it draws less voltage AND supposedly lasts longer.

Was it worth it...probably not!
But since I ripped all the boxes and sprayed liquid tape all over the wires, I couldn't really return it! :evil:

Passing along some good info though...
You need to wire the green to the black when installing the resister for the front blinkers!

User avatar
sdg1963
Posts: 35
Joined: Mon Nov 11, 2013 11:42 am
Location: Vancouver Canada

LEDs for license plate

Postby sdg1963 » Sat Oct 07, 2017 1:46 am

I've tried LED lights on my 2008 Pathy with no success , hyper-flashing and such issues.

What I would like to do is replace the rear license plate light with a bright white light. I've seen this on some other vehicles and they look rather sharp. Any ideas on vendors for a good quality replacement?


Thanks in advance.

Tusk
Posts: 15
Joined: Sat May 03, 2014 3:19 pm
Location: Madison, WI

Postby Tusk » Fri Nov 10, 2017 1:59 pm

I second superbrightleds.com I've ordered a fair share through them. Had one failure and they were fantastic to work with.

User avatar
underworld1001
Posts: 328
Joined: Sun Nov 27, 2016 9:05 pm
Location: Austin, TX

Re: LEDs for license plate

Postby underworld1001 » Sat Nov 18, 2017 10:25 pm

sdg1963 wrote:I've tried LED lights on my 2008 Pathy with no success , hyper-flashing and such issues.

What I would like to do is replace the rear license plate light with a bright white light. I've seen this on some other vehicles and they look rather sharp. Any ideas on vendors for a good quality replacement?


Thanks in advance.
I've actually been looking at these http://a.co/9BfFUdK for the license plate lights and the rear hatch. I tried some off brand ones that my brother had lying around and they killed the rear lights unless I was braking. Swapped back in the regular ones and the rear lights came back on again.

User avatar
sdg1963
Posts: 35
Joined: Mon Nov 11, 2013 11:42 am
Location: Vancouver Canada

LED bulbs

Postby sdg1963 » Fri Jan 19, 2018 2:33 pm

I installed some LEDs for my licence plate - looks great, super bright but the problem is they're so bright that they affect the rear view camera. The bulbs are super bright and shine into the camera, so what I do when backing up is turn the lights off in order to see what's projected on the screen.


Return to “R51 Electrical”