Rear Hatch & Glass Struts Revisited.......

Upgrades and modifications to Trims, Seats, Carpets, Roof Racks, Panels, Dashboard, Bumpers, Rocksliders, Paint, Decals...

Moderator: volvite

User avatar
eieio
Sponsored Member
Posts: 1841
Joined: Fri Jul 17, 2009 6:42 am
Location: Prescott, Az.

Rear Hatch & Glass Struts Revisited.......

Postby eieio » Tue Sep 26, 2017 6:02 pm

Can anyone verify that McMaster-Carr part number 9416K148 (which has changed to 9416K128) is the correct number for the 200 lb. struts for an early (2005) R51?
Also, does anyone have the McMaster-Carr part number for the support struts (equivalent to OEM) for the rear hatch glass?
Or, if not, the correct OEM lb. rating for them?


User avatar
smj999smj
Site Admin
Posts: 6054
Joined: Sun Jan 22, 2012 11:13 pm
Location: Prospect, VA

Postby smj999smj » Tue Sep 26, 2017 8:07 pm

I'm seeing "9416K28" as being the replacement for "9416K148," which was the numbered I ordered for my '06 Pathfinder rear hatch, listed as 200 PSI.

User avatar
eieio
Sponsored Member
Posts: 1841
Joined: Fri Jul 17, 2009 6:42 am
Location: Prescott, Az.

Postby eieio » Wed Sep 27, 2017 6:29 am

smj999smj wrote:I'm seeing "9416K28" as being the replacement for "9416K148," which was the numbered I ordered for my '06 Pathfinder rear hatch, listed as 200 PSI.
thanks for the correction :)

User avatar
eieio
Sponsored Member
Posts: 1841
Joined: Fri Jul 17, 2009 6:42 am
Location: Prescott, Az.

Postby eieio » Wed Sep 27, 2017 6:31 am

.............still looking for the info to order the rear glass struts :?

User avatar
smj999smj
Site Admin
Posts: 6054
Joined: Sun Jan 22, 2012 11:13 pm
Location: Prospect, VA

Postby smj999smj » Wed Sep 27, 2017 2:33 pm

I got my glass lifts at Rockauto, so I don't have the McMaster-Carr #. It would be listed in this thread somewhere:

http://www.thenissanpath.com/viewtopic. ... highlight=

User avatar
eieio
Sponsored Member
Posts: 1841
Joined: Fri Jul 17, 2009 6:42 am
Location: Prescott, Az.

Postby eieio » Wed Sep 27, 2017 2:40 pm

smj999smj wrote:I got my glass lifts at Rockauto, so I don't have the McMaster-Carr #. It would be listed in this thread somewhere:

http://www.thenissanpath.com/viewtopic. ... highlight=
thanks, did you get the rear hatch struts from Rockauto also?

User avatar
smj999smj
Site Admin
Posts: 6054
Joined: Sun Jan 22, 2012 11:13 pm
Location: Prospect, VA

Postby smj999smj » Wed Sep 27, 2017 7:32 pm

No, I got the 200 PSI hatch struts from McMaster-Carr over 3 years ago and I've never had a problem with them, no matter what the temperature is!

TNhunter
Posts: 37
Joined: Mon Mar 28, 2016 5:05 pm

Postby TNhunter » Mon Oct 16, 2017 9:30 pm

Be sure to get the 200 and not the 225. I got the 225 and HATE them. The rear lift gate will pop you if you're not holding some pressure on the dang thing. And it is not very easy to grab with one hand and close. I've thought about chucking them and buying some 200# struts.

User avatar
smj999smj
Site Admin
Posts: 6054
Joined: Sun Jan 22, 2012 11:13 pm
Location: Prospect, VA

Postby smj999smj » Tue Oct 17, 2017 6:17 pm

The glass lifts from McMaster-Carr are P/N: 9416K162

200psi is probably the most popular for the rear hatch. A lot of people have used the 225psi and have thought they were a bit too much.

User avatar
eieio
Sponsored Member
Posts: 1841
Joined: Fri Jul 17, 2009 6:42 am
Location: Prescott, Az.

Postby eieio » Wed Oct 18, 2017 8:05 am

smj999smj wrote:The glass lifts from McMaster-Carr are P/N: 9416K162

200psi is probably the most popular for the rear hatch. A lot of people have used the 225psi and have thought they were a bit too much.
thanks smj! :D
are they close to equivalent to stock lifts?

User avatar
smj999smj
Site Admin
Posts: 6054
Joined: Sun Jan 22, 2012 11:13 pm
Location: Prospect, VA

Postby smj999smj » Wed Oct 18, 2017 9:08 am

eieio wrote:
smj999smj wrote:The glass lifts from McMaster-Carr are P/N: 9416K162

200psi is probably the most popular for the rear hatch. A lot of people have used the 225psi and have thought they were a bit too much.
thanks smj! :D
are they close to equivalent to stock lifts?
NVSteve posted a pic comparison of the two and comments on page 7 of the link I previously posted:

http://www.thenissanpath.com/viewtopic. ... c&start=90

User avatar
underworld1001
Posts: 328
Joined: Sun Nov 27, 2016 9:05 pm
Location: Austin, TX

Postby underworld1001 » Tue Nov 07, 2017 8:57 pm

My rear struts are getting slightly weak on mine. They've been replaced before with a brand by the name of StrongArm by the previous owner, but no idea how long ago. I'm getting ready to order some McMasters but not sure if I have to order ends so I figured I might as well order theirs. Has anyone had fitment issues with their ends on our vehicles or is the ball portion the same side regardless of vehicle? Kinda like a industry standard size regardless of brand.

Pic of items (excuse the bad thumbnail alignment)
Image

User avatar
smj999smj
Site Admin
Posts: 6054
Joined: Sun Jan 22, 2012 11:13 pm
Location: Prospect, VA

Postby smj999smj » Wed Nov 08, 2017 10:51 pm

I just transferred my stock sockets on my 2006. I think there was a change in the threading around 2010, if I remember right? I know it's mentioned somewhere in that monster thread, I just don't remember where and don't have time right now to go through it.

User avatar
underworld1001
Posts: 328
Joined: Sun Nov 27, 2016 9:05 pm
Location: Austin, TX

Postby underworld1001 » Thu Nov 09, 2017 6:01 am

Hey SMJ, it's all good. I have a starting point now so I'll look through that thread. If anything it gives me something to do at work :lol:

User avatar
underworld1001
Posts: 328
Joined: Sun Nov 27, 2016 9:05 pm
Location: Austin, TX

Postby underworld1001 » Sat Nov 18, 2017 10:10 pm

Alright, replaced the rear hatch struts and it lifts higher than before and I don't have to help push it up. I ordered the end caps from McMaster and they're good. They have a dab of grease in them to lubricate the ball attachment portion. I ordered the 200lb and wish I could have done it sooner.


Return to “R51 Body Interior and Exterior”