The Nissan Path Forum Index The Nissan Path
The World Wide Nissan Pathfinder Owner's Forum
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Use Google to search TheNissanPath forums ->
VDC OFF SLIP light solid.

 
Post new topic   Reply to topic    The Nissan Path Forum Index -> R51 Brakes, Tires, and Wheels
View previous topic :: View next topic  
Author Message
TooTallMike



Joined: 28 Oct 2015
Posts: 63
Location: Jblm, Washington

PostPosted: Sun Dec 23, 2018 6:58 pm    Post subject: VDC OFF SLIP light solid. Reply with quote

Did a lift and fixed a squeaking spring on the parking brake shoes and they came on. Bought an ABS reader and it says it's not equipped on my vehicle. Brake fluid is at Max and never had issues with the VDC before.
Back to top
View user's profile Send private message
TooTallMike



Joined: 28 Oct 2015
Posts: 63
Location: Jblm, Washington

PostPosted: Wed Dec 26, 2018 12:43 pm    Post subject: Reply with quote

Took it to the dealership and had them run consult
This is what they gave a me a print out of.

C1102 RR LH SENSOR-1
C1143 ST ANG SEN CIRCUIT
C1163 ST ANG SAFE
U1000 CAN COMM CIRCUIT
P1808 VHCL SPEED SEN-ABS
P0500 VEHICLE SPEED SEN A
P1212 TCS/CIRC

Any and all help is appreciated.
Back to top
View user's profile Send private message
disallow
Site Admin


Joined: 13 Aug 2008
Posts: 2714
Location: Winnipeg, Canada

PostPosted: Wed Dec 26, 2018 1:01 pm    Post subject: Reply with quote

Wow that's alot of codes.

I'm willing to bet that the only real one is the wheel speed sensor one. Check if it got unplugged or pinched. Far as I know it's one harness on the diff. I have a post here somewhere showing when I did mine.

I also suggest buying a code reader capable of pulling the ABS codes. Got mine for $120. Has paid for itself several times over. And you can reset the codes to see what comes back right away
_________________
Terry in Winnipeg

'05 Pathfinder SE Premium 4x4 - 343000kms (213000mi) - weekend warrior, Cortex Superchips on 87 Octane Tune, K&N filtercharger, Airlift 1000, Prodigy Brake controller, 7 pin trailer hookup, Prostart Remote Starter, Cooper Discoverer ATw P265/70/16
Back to top
View user's profile Send private message
TooTallMike



Joined: 28 Oct 2015
Posts: 63
Location: Jblm, Washington

PostPosted: Wed Dec 26, 2018 7:32 pm    Post subject: Reply with quote

Thank you for your reply! So I unplugged and replugged the rear diff sensors and cleaned them off. I caved and bought another scanner and reset the codes that came up in case they were just stored. Now the only codes I'm getting are C1143 and C1163. Which all point to the steering angle sensor. Now I did replace both inner and outer tie rods on both sides and had an alignment done. It's not quite in spec in the back due to the springs I put in. Waiting for it to settle and then I'll go have it checked out again. Any ideas to how to reset those codes or what I should do? Thank you so much again for replying.
Back to top
View user's profile Send private message
smj999smj
Site Admin


Joined: 22 Jan 2012
Posts: 5321
Location: Prospect, VA

PostPosted: Sat Dec 29, 2018 9:29 am    Post subject: Reply with quote

If the alignment is changed, then the steering angle sensor needs to be re-learned. This is usually part of a wheel alignment. However, if you've changed the alignment by putting in the springs, then I would suggest you get another wheel alignment and have the steering angle sensor position re-learned.
_________________
2006 Pathfinder LE VQ40DE AWD, aftermarket radiator, Airlift 1000's, Bilstein HD rear shocks, Doug Thorley shortie headers and mid-pipes, Magnaflow 12580 muffler, aFe Momentum GT CAI w/ dry filter, XTP plenum spacer, Superchips Flashpaq tuner
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    The Nissan Path Forum Index -> R51 Brakes, Tires, and Wheels All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group