Postby Graham W » Mon May 13, 2019 3:28 am
Its dead simple to take the seat out and pull apart.
Leave the electrics attached until the 4 mounting bolts are out so the seat can be moved. Do the rears 1st, then move it all the way back, cos when you undo the front it can 'fall' backwards, then let it lean back and unplug the connectors.
Once upside down the clips holding the seat covers on can be pinged off, its obvious when you see it how to do it. Couple of small screws hold the plastics on.
Then refit in reverse.
I took mine out to access the plastic heater parts under the seats, but stripped them to clean around the seats as the previous owner was a dirty minger and the leather was filthy.
At some point i will take the drivers out and pack with more foam as its gone flat, my arse it obviously fat lol !