radio wiring diagram

You gotta Love these old VG30E/i powered beasts, raw truck DNA to the core.

Moderator: volvite

Bradwm2
Posts: 36
Joined: Thu Apr 30, 2009 10:24 pm

radio wiring diagram

Postby Bradwm2 » Mon Jun 15, 2009 8:20 pm

hey ive got a 95 pathy unfortunatly the d.a.'s that had it before me cut out the radio harness so all i got is stray wires and i know a lil bit bout radios like the red yellow and black and the speaker wires but idk wat the rest are i used just the red yellow and black and no power wat are the rest of the wires?


User avatar
blink32
Sponsored Member
Posts: 898
Joined: Wed Sep 13, 2006 6:38 am
Location: World Traveler

Postby blink32 » Tue Jun 16, 2009 3:34 am

Do you have(or did it originally have) the 2 speaker, 4 speaker or the 6/8 speaker setup? Being a pathy probably a 4 or 6/8 setup but need to know which first. Also do you know the colors that are left? I've got the manual but need to know which setup you have to tell you anything definite. And since the HU upgrade I assume all the other components have been upgraded also?

Bradwm2
Posts: 36
Joined: Thu Apr 30, 2009 10:24 pm

Postby Bradwm2 » Tue Jun 16, 2009 10:53 am

i really dont know as far as the setup when i got it it had no radio and no speakers.

Bradwm2
Posts: 36
Joined: Thu Apr 30, 2009 10:24 pm

Postby Bradwm2 » Tue Jun 16, 2009 10:56 am

also im starting to think the black red and yellow wires arnet wat they r supposed to be i startin to thing that they are for speakers.

User avatar
blink32
Sponsored Member
Posts: 898
Joined: Wed Sep 13, 2006 6:38 am
Location: World Traveler

Postby blink32 » Tue Jun 16, 2009 4:40 pm

Can you look around and see how many factory speaker holes/areas there are? I only press the issue because it matters significantly if there are only locations for 2, 4 or 6/8 speakers. One version had amps one didn't.

I didn't realize you were saying you had those wires. The two speaker system does not utilize any yellow wires nor any solid red wires. Black would go to the speakers. The 4 speaker setup also uses no Yellow nor any solid Red wires. The Black also goes to the rear speakers. With the 6/8 setup there are multiple amps involved and all kinds of different colors.

Bradwm2
Posts: 36
Joined: Thu Apr 30, 2009 10:24 pm

reply

Postby Bradwm2 » Tue Jun 16, 2009 6:10 pm

as far as i knw there are only 4 speaker holes 2 6.5s and 2 5x7s there was also a place for tweeters in the pillars so.... and i have a fuse for an amp so there may have been 1 amp

User avatar
blink32
Sponsored Member
Posts: 898
Joined: Wed Sep 13, 2006 6:38 am
Location: World Traveler

Postby blink32 » Tue Jun 16, 2009 6:33 pm

If I were in your position I'd just run all new wiring.

Bradwm2
Posts: 36
Joined: Thu Apr 30, 2009 10:24 pm

Postby Bradwm2 » Tue Jun 16, 2009 6:46 pm

i know i did that for a lil while but then started to run out of wire but i like a challenge and to lern more about things so i figured id go for it was i wrong ill stiil probably do research and try it again

User avatar
blink32
Sponsored Member
Posts: 898
Joined: Wed Sep 13, 2006 6:38 am
Location: World Traveler

Postby blink32 » Tue Jun 16, 2009 6:49 pm

Look around for the Factory Service Manual for it. You'll get a good idea for the color codes for the wires and how many there are and where they run from there.

Bradwm2
Posts: 36
Joined: Thu Apr 30, 2009 10:24 pm

Postby Bradwm2 » Tue Jun 16, 2009 6:52 pm

ok apreciate it btw can you give me some help on the other post about the speakers

User avatar
blink32
Sponsored Member
Posts: 898
Joined: Wed Sep 13, 2006 6:38 am
Location: World Traveler

Postby blink32 » Tue Jun 16, 2009 6:59 pm

Are you talking about what colors the wires are for the speakers?

Bradwm2
Posts: 36
Joined: Thu Apr 30, 2009 10:24 pm

Postby Bradwm2 » Tue Jun 16, 2009 7:03 pm

no im trying to figure out were i can add 2 4x4 speakers

User avatar
blink32
Sponsored Member
Posts: 898
Joined: Wed Sep 13, 2006 6:38 am
Location: World Traveler

Postby blink32 » Wed Jun 17, 2009 2:20 pm

Gotcha. I didn't see that other post. I no longer have a D21 chassis vehicle so I can't help you there. Good luck.

Bradwm2
Posts: 36
Joined: Thu Apr 30, 2009 10:24 pm

Postby Bradwm2 » Wed Jun 17, 2009 3:26 pm

ok preciate the help

Bradwm2
Posts: 36
Joined: Thu Apr 30, 2009 10:24 pm

Postby Bradwm2 » Fri Jun 19, 2009 8:57 pm

hey decided to just run new wires thanx for the help


Return to “1986-1995 Pathfinder (WD21)”