Moderator: volvite
It won't switch to rear av until it is hooked up correctly, hitting the cd button will cycle the mode between dvd and cd when it is hooked up right and dvd will be the mode you will have it on when playing through the aux cableleplascencia wrote:well this is my first post, I am trying this mod and my radio does not switch from cd to rear av,I have a 2006 Pathfinder with Bose radio, any help would be appreciated
Thank you
Did you connect pins 39 and 40 together ? That makes the system think something is connected to the rear AV button and will enable those inputs.leplascencia wrote:well this is my first post, I am trying this mod and my radio does not switch from cd to rear av,I have a 2006 Pathfinder with Bose radio, any help would be appreciated
Thank you
Finished this yesterday and it works perfectly. I was confused about the apparent discrepancy between the photo and the pin layout diagram too, but they're both correct. The pin layout diagram is looking at the wiring harness head-on (from the perspective of the back of the stereo).ercaza wrote:I want to do this project but have a doubt.
On the first picture the cables are all the way to the right but in the diagram of the M46 pins , the 39 and 40 pins are on the left side.
Which side is correct?
Sorry but I'm new to this kind of job.
Thank you all!
Could you be able to send pics of it finished to see what I did wrong? Thanksforcryingoutloud wrote:I completed this project today. Which part are you unclear on?
Pin 39 should be connected to pin 40. Pins 37 and 36 connect to the right audio channel. Pins 35 and 34 connect to the left audio channel.
When facing the back of the stereo, pin 40 is top right.
I used female RCA connectors (center is positive, outer is negative), then connected a male-RCA-to-headphone-jack cable to hook up my phone.
Okay so I'm a little confused about the RH+/ RH- and LH+ / LH-. Pins 36- and 37+ are for Right so do loop them together and wire it into the Right (Center) Positive female RCA connector. or does the RH- and LH- go to ground?forcryingoutloud wrote:I completed this project today. Which part are you unclear on?
Pin 39 should be connected to pin 40. Pins 37 and 36 connect to the right audio channel. Pins 35 and 34 connect to the left audio channel.
When facing the back of the stereo, pin 40 is top right.
I used female RCA connectors (center is positive, outer is negative), then connected a male-RCA-to-headphone-jack cable to hook up my phone.