Postby Tech » Fri Mar 18, 2011 11:29 pm
on the top of the connector is a little release tab, gotta push that down...Sometimes it still doesn't lift the little pawl of the tab on the bulb....helps if you push the socket in toward the bulb, press the tab down, and maybe even lift up a bit on the front edge of the release to help it over the tab on the bulb.
If you undo the white ring like Spicoli says, you can pull out the bulb with the connector on and work on it outside of that confined space. It'll become really obvious.
If by chance you were running a PIAA type aftermarket knock-off/blue bulb, the socket may be melted to the bulb...
(@ Spicoli; Riding time yet?)