Can you tell me what kind of bulbs are on those CGS headlights?
I'd like to order it as well as a HID kit for the low beam.
DIY: Install aftermarket headlights (CG projectors)
Moderator: volvite
-
jiggster1974
- Posts: 16
- Joined: Mon Oct 13, 2014 5:55 pm
- Location: Lafayette, LA
Bulb for CG/Anzo's
The Low beams are H3's and the High beams are H1's.bmramon wrote:Can you tell me what kind of bulbs are on those CGS headlights?
I'd like to order it as well as a HID kit for the low beam.
I ordered mine from ProTuning Lab. Hope it's ok to link to them. I believe they have some similar w/the HID kit for the lows.
http://www.protuninglab.com/05nifrpaccha1.html
-
jiggster1974
- Posts: 16
- Joined: Mon Oct 13, 2014 5:55 pm
- Location: Lafayette, LA
Forgot to mention..
The images on ProTuning Lab show the CCFL's as blue. They are not blue, but bright white.
-
jiggster1974
- Posts: 16
- Joined: Mon Oct 13, 2014 5:55 pm
- Location: Lafayette, LA
Re: Great write up!
If by connectors breaking, you mean those little clips/rivets that hold the top of the grill on, yes, i broke 3 of the 4. The clips that fasten the grill to the headlights, I almost broke, but i ended up taking my time w/those.bbermann wrote:Well, this is still on my list.jiggster1974 wrote:I just have to say thanks to Sayantsi. Great write up. I purchased the same set of CGS, followed your instructions and had zero issues.
Thanks so much!! I was done in under 2 hours and can't be happier with the look. Light output is a tad better than the factory lights, once I had them aimed properly.
It would be good to know if you broke any connectors during the process so I could have those on hand.
Also, did you get the Anzo? If black, I would love to see pics to compare to chrome.
Thanks
I ordered some of the plastic rivets off of eBay. http://www.ebay.com/itm/121210474356
Electrical wise, I just cut the two wires to the parking lights and wired the halos in there.
Also, i ordered chrome, so no black. Hope that helps!
Thanks!
Find Your Forum!