I just finished my LED conversion. Turn signals (white/amber switchback for the front), reverse lights, license plate, interior; all white. Pictures coming soon.
I'm think about doing something like the Audi LED's for the front. Just not sure where I would put it. If anyone has an opinion, I'd love to hear it.
Here's a link with a DIY: http://forums.vwvortex.com/zerothread?id=3952827
Thoughts for LED project
Moderator: volvite
-
DJLittleWonder
- Posts: 17
- Joined: Fri Feb 20, 2009 5:56 pm
- Location: NYC
-
JAHBLESSINGS
- Sponsored Member
- Posts: 1400
- Joined: Mon Oct 13, 2008 1:36 pm
- Location: 90 DEGREES FLORIDA
I think they look pretty good inside the headlight. My first though would be to do the inside verticle and lower horizontal of each headlamp. Like this.
. \ __________ / .
I have no experience with these so LED's inside reflector headlamps may get drown out. You may have to have projectors to make LED's in the headlamp work.
. \ __________ / .
I have no experience with these so LED's inside reflector headlamps may get drown out. You may have to have projectors to make LED's in the headlamp work.
-
JAHBLESSINGS
- Sponsored Member
- Posts: 1400
- Joined: Mon Oct 13, 2008 1:36 pm
- Location: 90 DEGREES FLORIDA
I've seen plenty of people mod their headlamps so I don't think resealing is an issue if you know what you're doing. What I think will be challenging with the Pathfinder is finding a place to mount the LED's within the headlamp. There is no mounting location across the bottom portion of the lamp. You would have to add either a platic or metal piece that holds the LED's. That's the difference I see between the examples shown in the VW link and our's.
Find Your Forum!