Moderator: volvite
After installting nx409, i have to press the emergency break in order the dvd moive show on the screen. Any help will appreciate.pathfinder05 wrote:i have an 05 pathfinder and replaced with Clarion NX409. Can I use the same switch and do you know where to find the break sensor wire?
Yes i did...everything is working fine. I just need to figure out how to bypass the hanh break in order to view DVD movie.kmjsuperfly wrote:It should work. Did you install this your self? In order to get the GPS to work correctly did you need to provide the clarion unit a speed sensor input and a parking brake input? I am not familiar with this Clarion Unit but if you can get your hands on a wiring schematic for the unit you should be able to tell where these points are terminated. I know for the OEM unit you need to BOTH disconnect the speed sensor wire AND ground the parking brake input to get it to operate basically tricking the unit into thinking you are stopped with the parking brake applied. Maybe with the clarion unit you can get the DVD to operate by just grounding the parking brake input? I guess one way to find out is to try it.
Another thought. was this a replacement of the OEM unit? If so, was there a wiring harness that was installed to go from the stock wiring harness to the clarion unit. If so, you can just look at the '05 service manual and it should give you the connector pinouts and locations of the parking brake input and speed sensor wire on the stock wiring harness.
good luck