Moderator: volvite
That sucks. Here's the link to the part numbers on Courtesy: http://www.courtesyparts.com/pathfinder ... _6990.htmlTouchdown wrote:BAD NEWS - I ordered the 9416K148 200lbs struts and it appears the stock threads are different on my 2011.
I'll have to order the 4 clips from an 07 or something.
I'll post back with the part number if everything works out.
Good to hear. I was also going to suggest looking at McMaster-Carr again because they sell all types of ends for the struts.Touchdown wrote:UPDATE:
I drilled out the old plastic ends that hold the struts on with a 19/64 drill bit.
That was enough to thread on the McMaster-Carr struts.
I added a good bit of JB Weld to the ends and that should hold just fine.
I'll hopefully never have to worry about the rear hatch again!!