Postby smj999smj » Fri Oct 07, 2016 4:14 pm
It's best to provide information such as model year and transmission type when posting questions. Also, a picture of what you have on the transfer case can be very helpful. To post pictures, you'll need a service like Photobucket to post the URL link into your message.
There should be a speedometer pinion assembly that inserts into your transfer case and held in by a single, 10MM head bolt. The cable should thread onto the pinion assembly. I know speedometer cables were used on the early WD21 Pathfinders; it's possible that later models may have switched from cable to an electronic speed sensor. If this was the case, it would still have the pinion assembly, but it would have a harness connector and not utilize a cable to it. I'm mentioning this just in case somebody replaced the transfer case with a later model (or installed the wrong pinion assembly for some reason) and it has the wrong pinion assembly for your vehicle.