The Nissan Path

7river

Timing belt within 50K
Checked timing ok
pulled one plug good
tried starting w/ jump from truck, turns fast no go
checked CPS
replaced cap and button

changing rotor tomorrow. otherwise I need to abandon it and take bus home

7river

I have a 99 pathfinder Was driving from Upper Peninsula Mi to Catskill Mtns of NY. Noticed idle was rough, then felt like miss. 500 miles into trip just lost power and died. Had towed to father-n-laws by Toledo. This is what I did Checked spark out of cap w/ spark tester Got spark all cylinders. Did...

7river

Thanks!
They had it! Coincidently they also had a picture of one disassembled which lead me to get mine apart so I can solder new wires on:)
Thanks for taking the time to share the link!

7river

I still didn't put it back together. It is a big tranny with the transfer case..54" long!
Most likely I will start putting back together Friday. I will be glad to let you know. If you dont hear from me, check in next week to remind me (4 kids, you tend to forget some stuff)

7river

I ripped the wires out of my crankshaft position sensor plug. Anyone have one they are parting out? Need plug w/ attached wire (6+ inches)
It is a 2 wire weather tight nissan plug.
May be other places this plug is used and I'm sure other years.
Any advice is also welcome.

7river

Thanks for the advice.
I had the flywheel turned. Still did not put it back together. I ripped the wires out of the CPS. Didn't see it. So now I need to find a plug with wires to splice.

7river

This is the rear passenger wheel well. screw driver went threw one spot. rest is solid. http://i1300.photobucket.com/albums/ag90/7river/IMG_8062_zpshfe0trwz.jpg [/URL] This is the same fender. This is worse fender by far. Rest just have bit of surface rust. [/img] http://i1300.photobucket.com/albums...

7river

Buying a 99 R50 4X4 with 260K and and blown clutch. Underside is good except two spots in wheel wells. Drivers front and passenger rear. I poked open all I can with screw driver. Damage is only where you see. Everything else is very solid. Truck is $400 and rot shown is all of it. Doesn't seem to be...

7river

Thank you for the input!
I was quoted $550 labor to do this job. Funny I have a tranny jack I used for my E4OD but it's in another state.
How do you know when the flywheel needs to be removed and turned?

7river

wouldn't pedal action just be the master cylinder. Does the slave make noise or effect pedal action?
Never worked on clutches and had no issues on mine so still getting familiar.

7river

Thank you for reply I didn't actually drop the money for it yet, seems like a good deal and I'm on a budget. Just getting nervous because can't find any threads or videos on a clutch job for R50. Surprising. Maybe they normally don't go bad. This was owned by a 25ish girl(only owned by her and siste...

7river

Yes 4x4
forgot there was 2x4 option.

Have you done a r50 before?

7river

Hi I just bought a 99 Pathfinder and looking for feedback on how hard the clutch job will be to do myself on the ground (have use of garage). Any videos or pointers? planned on getting the excedy oem clutch kit. It is 4x4 I am ok with auto mechanic work but this is my first clutch Thank you for any ...

Search found 13 matches

Help! Broke down in Ohio!

WTB CPS plug and wire for (99 )pathfinder 5 spd

Do you think this 99 is too rusty?

99 Pathfinder Clutch Replacement Help

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums