The Nissan Path

99MNpath

I got it started, I had not put the starter bracket back. Acts like a spacer. Starts and runs great. Only current issue is my slave cylinder banjo bolt is stretched and leaks.. I used a few different brass washers still leaks.. Where can I get a replacement salve banjo bolt??

99MNpath

Changed the starter awhile ago, same thing.I hope the bellhousing doesn't have to be seperated again. What else could it be ... Motor spun during instal of the motor .. Now all the way in its stuck

99MNpath

Wow I need some help... Blah the swap was done in less than a week but I have spent more than that amount of time trying to fix this leaking clutch hydrolic line.. Still leaks but finally got enough pressure to actuate the slave and my motor still won't turn over., the starter clicks like it's engag...

99MNpath

Hey guys, ok. I got a new battery in. When all the electrical is tight the locks, lights and ignition work. The click sounds like the armature extends and binds.. The motor is locked up.. I think by the clutch.. Tried bleeding it a few ways with no luck.. Having a buddy come over tonight to try blee...

99MNpath

Thanks for the reply. Here is an update, I thought about it and I decided to put a ground strap from the starter to the chassis. Now when I turn the key I here a loud click. Sounds like the starter is engaging but not turning over.. I put a socket on the crank shaft and could not turn over by hand w...

99MNpath

I have dash lights and strong headlights/tail lights until I turn the key to start all goes black I get a click at the starter (only on first try) then nothing and the dash lights are dim acting like a dead battery... If I disconnect and reconnect the Battery it resets... Does the 97 ecu work for a ...

99MNpath

I took the motor out of a 1999 3.3 and put in it my 97 5 speed..

The motor is all bolted in and wired up, when I put the key in I hear relays freaking out and when I turn the key to start I get a click then silence.. No crank, No dash lights

What am I missing?

Thanks
-Brian

99MNpath

Removing everything... I can not seem to get any tools on the torque converter bolts. I have removed the starter but the bolts are blocked by the engine casing I don't have a straight shot.. and a wrench wont fit nicely because the flywheel sticks out causing a loose fit which will round or pop off....

99MNpath

The title nailed it on the head, I have a nice running and driving 99 pathfinder LE that is being dismantled. If you are looking for parts let me know!

Gold/tan pwr heated seats, 4x4.. its all there waiting for you!

Body has a dent on nearly every panel but it is less rusty than the average..

99MNpath

Yo, I am Brian from MN. I have had A few infiniti/Nissan in the last few years.. Currently My fleet includes 3 pathfinder/qx4 models.. Had a 2000 I30 my sister crashed and I parted out last year. 99 gold QX4 @175k commandeered by Mom.. 97 black Pathfinder LE 5 speed.. Picked up @ 197k with a rod kno...

Search found 10 matches

1999 3.3Auto Engine swap into a 97 Manual issues

99' with a few bolts I cant reach... Engine/trans removal

COMPLETE PART OUT! 99 Pathfinder LE Auto

Hey all!

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums