The Nissan Path

Swerve

I also repaired the rust spots in the tailgate the same way. I removed the handle and found another water leak in this process, this time in the left most handle's bolt. Here's some shots of nut holding it and the rust that formed on it and around the bolt and tailgate opening. This was a slow and a...

Swerve

smj999smj wrote:A clear, plastic protector...like the kind they use to prevent chips on the front end of cars...would probably work there.

Yes, it definitely would and nowhere as ugly as the felt strip I used on the doors.

Swerve

I got to sanding, priming, and painting the rust off my doors and tailgate this past week. I used my often useful Dremel to sand down all the rust and pitting out, then some high build primer and finally some Dupli-Color â€œPerfect Matchâ€ spray paint, Silver Mist K-12 in my case. Itâ€™s close enoug...

Swerve

The nuts/bolts on my hatch handle rusted as well. But it wasnâ€™t the hatch seal leaking it was the handle leaking. The bolts were rusted so bad that one broke and had to be cut to get the handle off. Put a new handle on with a bead of silicone and itâ€™s been dry ever since. Apparently whatever ga...

Swerve

Nice lights but a bit pricey for eBay lights. Too bad projector HID werenâ€™t an option or a feature of higher trims. I do like the looks of these although without the angel eye.

Swerve

The SE Off Road also came with 1â€ taller tires, P265/75R16 vs 70 on non OR. I wonder if there is any difference in the OR for the Speedo or not? The speedometer is the same, however, it is calibrated for the Off-road versions tire size (as all are), so it actually reads accurately. Iâ€™m stock 265...

Swerve

The SE Off Road also came with 1â€ taller tires, P265/75R16 vs 70 on non OR. I wonder if there is any difference in the OR for the Speedo or not?

Swerve

I did have to shave a little off of the top of the support bracket for the upper plenum because it was pushing the plastic plenum up a hair with the bolts installed. It wasn't a big deal...just broke out the carbide burr and grinded a little bit of the metal bracket away. I did install new Fel-pro ...

Swerve

The best things to do either once u changed something ( exhaust spacer whatever) is to do a uprev tune on a tune. these cost real money ( 700 bucks a few years ago) but u get to keep the software and tuning adapter and they ae proven to work... and to make the best out of any mods u might have adde...

Swerve

is there any point to a throttle body spacer like the aFe Power or airaid ones on amazon? https://www.amazon.com/aFe-Power-Silver-46-36002-Throttle/dp/B001EQLDZA/ref=sr_1_1?keywords=afe+power+throttle+body+spacer&pd_rd_r=6272d614-b770-43c8-9c95-2a70a667d60a&pd_rd_w=Mgyrq&pd_rd_wg=ehPkq&a...

Swerve

Anyone running the SF Creation spacers lift kit here?

https://sfcreation.com/t/pathfinder-r51-platform

Looks simple and very inexpensive. Might need camber bolts as detailed in smhâ€™s sticky and maybe rear shocks.

What do you guys think?

Swerve

check out Doctahjones' former ride for some inspiration. I have the same wheels and will be blacking them out just like he did. He mentions the following and had at least a 2" suspension lift: "Yup, 285/65/18 fits in the spare area on the factory le rim. Sometimes you have to help it get i...

Swerve

I've had my Pathfinder off the road for a few months and have been driving my Frontier in the meantime. Just got two tires replaced the other day and yesterday I replaced the left-rear wheel bearing hub/brake caliper/pads and rotors. Will be doing the same to the other side today and will be replac...

Swerve

Still happy with the AEM drop in filter? Iâ€™m on the fence between paper again or a step up to this dry filter.

Iâ€™ve done K&N before in previous cars but not a big fan of oiling the filters.

Swerve

While cleaning and conditioning door gaskets, I found a line of rust where the bottom of the door panel meets the inside of the door. It's just plastic on painted metal and it seems over the years of opening and closing, the sharp plastic panel has rubbed the paint off and moisture has found metal. ...

Search found 53 matches

throttle body spacer worth it?

SF Creation Spacers Lift kit review?

Rust on insides of Doors and under Tailgate Handle

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums