The Nissan Path

slavabon

Highway driving should not be a problem with overheating, since your external cooler is most efficient here, with all the air going through it. Unless, of course you are towing something up the hill, adding more load. This is the first time I'm hearing of any immediate issues as a result of the bypa...

slavabon

Did my 2010 this week with 49k on the clock. Not sure if it would ever fail otherwise, but considering the warranty extension is for 2010 as well, i did not want to find out. I decided not too wait too long, since I'm not a big fan of remanufactured transmissions either - even if its covered by warr...

slavabon

What about doing the whole lip, but leaving the metal skid plate alone? Aluminum on black will look trick, no?

slavabon

Guys, what is the correct way to do this (it has been a while) - do I leave the engine running or not when checking AT fluid level?
Thanks!

slavabon

I think it's our clunking is gone, based on that pic. These bushings are destroyed! It sucks that you can't really see their condition until you remove them. Once removed, you might as well put in the new set. But ipthis is an easy task, assuming you have already checked all other obvious things and...

slavabon

Otratw switches are nice and used extensively by xterra offloading crowd. They are a bit bulky, however, at least for my taste. They don't look factory. What does look factory is Scion switch - http://www.oznium.com/scion-switch-led
I have one and it looks factrory compared to your stock units.

slavabon

It does sound like fan shroud or fan clutch. Can you peek in there and see what is going on? If it is a shroud hitting the fan blades, you will see damage, marks, etc.

slavabon

No filter to replace. I'd do dump and fill.

slavabon

Just polish it. Plenty of polish kit available in auto stores. Look up the process on youtube and do the same thing. Replacing the lights will cost hundreds, whilst polishing can be done for under $20 and a little time.

slavabon

eieio wrote:
FindyourPath wrote:Who is the dumbass jap who designed this???
offensive

Eieio,
If your interior got socked like his did, being offensive would be the last thing on your mind...

slavabon

Part 95510M as shown in the diagram from courtesy:
http://www.courtesyparts.com/pathfinder ... _6993.html

slavabon

After a few months of looking for the cause of this noise I was finally able to find the problem and get it sorted. As I have mentioned above - I would hear clunk when taking a turn when driving over a bump or uneven road surface - anything that would contribute to more flex on the frame. Dealership...

slavabon

Just to clarify on the night pix - was the top picture taken with your headlights and stock fogs on and bottom picture with all the lights on including IPFs?

slavabon

Ok, thanks! Now it makes sense. How did you drill through that metal square tube under the bumper cover to be able to put the light there? Im curious how did you work the angle of the drill considering the lack of space to hold te drill perpendicular to the surface, unless you were able to drill fro...

slavabon

Looks good. How did you mount them? That bumper cover is very flimsy in that area aside from the small metal brace holding the bumper cover clip. Even that brace is kinda week as light mount location. Can you take a close up pic of the mounting location, if you get a chance? I've been working on the...

Search found 214 matches

Checking AT fluid level - leave engine running or not?

Re: Mother F*cker!!!!

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums