Grille guard OEM

HydroPonix · Postby **HydroPonix** » Thu Jan 09, 2014 2:51 pm

So I found a brush guard I like, I looked all over the place...

Its a 2006 Frontier Grille guard part 999t4 br200

Does anyone know if the Frontier guard fits a 2005 Pathfinder?

akley88 · Postby **akley88** » Fri Jan 10, 2014 5:33 am

it should fit cause the front ends where the same until 08

HydroPonix · Postby **HydroPonix** » Fri Jan 10, 2014 10:25 am

What about the frame mounts?

HydroPonix · Postby **HydroPonix** » Fri Jan 10, 2014 1:22 pm

I did some digging and found this

It says pathfinder/frontier 2005 and the part number 999t4 br200... so ill take my chance and give it a good look

ill let you guys know how it works out... if anyone is intersted, thdre are 4 at nissan dealers and 9 in nissan warehouses in the US, i will be more than happy to tell you where to call

Zen_master · Postby **Zen_master** » Sat Jan 11, 2014 4:06 pm

thanks and keep us posted.

HydroPonix · Postby **HydroPonix** » Sat Jan 11, 2014 5:32 pm

Ill be home in a week or so. When i get back ill try to fit it, I will let you guys know how it went, take some pics

HydroPonix · Postby **HydroPonix** » Wed Jan 22, 2014 10:49 pm

Alright! Fits like a dream. Plus, they did not have to remove the light bar in my bumper. It looks nice, high quality, It will just take some getting used to is all because it is quite big. I called the local Nissan dealer, Tynnan's here in Aurora, and they had found 9 across the US in storage, at a little under $400 and because I had it sent to the dealer, I didn't have to pay shipping.

NmexMAX · Postby **NmexMAX** » Thu Jan 23, 2014 9:52 am

Is there any reason to think it wont fit the 08+ models?

HydroPonix · Postby **HydroPonix** » Thu Jan 23, 2014 10:54 am

Is 08 when they changed the front end? If they did, it will still fit, it just wont be flush with the front end and will "stick out" more. Im thinking the 05 to 07, if you look at the car from the side it has a more boxy design while the 08+ are more curved and aerodynamic. The mounts are the same, i would think, its just the guard will appear to be straight up and down and the car will curve away from the bars. You could probably do something to the main bracket mounts to put an angle on the bumper bar, but I dont know.

skinny2 · Postby **skinny2** » Thu Jan 23, 2014 11:00 am

Howz about a pic of more than the packaging?

HydroPonix · Postby **HydroPonix** » Thu Jan 23, 2014 1:38 pm

skinny2 · Postby **skinny2** » Thu Jan 23, 2014 2:42 pm

she's a BRICK HOUSE

akley88 · Postby **akley88** » Fri Jan 24, 2014 5:47 am

HydroPonix wrote:Is 08 when they changed the front end? If they did, it will still fit, it just wont be flush with the front end and will "stick out" more. Im thinking the 05 to 07, if you look at the car from the side it has a more boxy design while the 08+ are more curved and aerodynamic. The mounts are the same, i would think, its just the guard will appear to be straight up and down and the car will curve away from the bars. You could probably do something to the main bracket mounts to put an angle on the bumper bar, but I dont know.

this is the issue using the grill guard will cause. the nose of the 08+ pathy was extended to give room for the v8. so the brush guard would look angled or offset.

NmexMAX · Postby **NmexMAX** » Fri Jan 24, 2014 8:48 am

Although not the same, it resembles volvite's, and his is an 08 V8.

2012Pathfinder_EB · Postby **2012Pathfinder_EB** » Fri Jan 24, 2014 8:51 am

More places to mount LED's - looks tough.

Grille guard OEM

Grille guard OEM

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums