Replaced 2009 Pathfinder S Head Unit with Clarion NX409

Oh yeah, it's the geek bling with flashing lights, just can't get enough.

Moderator: volvite

pbradley
Posts: 5
Joined: Sun Jul 18, 2010 8:46 am
Location: USA

Replaced 2009 Pathfinder S Head Unit with Clarion NX409

Postby pbradley » Sun Jul 18, 2010 8:54 am

I was posting this in case any one needed any pointers. I also replaced all the stock speakers with after market. I used Sony XSGTX6930 6x9-Inch Coaxial 3-way Speakers for the front door and Sony XSGTX1640 6.5-Inch Coaxial 4-Way Speakers for the rear door. The fronts went in without a hitch with the only mod being me tearing the plug off the old speaker and epoxying it to the new one so I wouldn't have to cut the factory harness. The rears were more fun. I took the factory speakers and cut all the guts out leaving the outer frame and plug. I then mounted the new 6.5s into the from and soldered the leads from the old plug to the new terminals. Was able to use the factory harness again and the frame fit the whole perfectly. Anyway, if anyone has any questions, let me know.


papapoops
Posts: 1
Joined: Sat Aug 28, 2010 7:19 am

Postby papapoops » Sat Aug 28, 2010 7:51 am

Juat bought a 2010 Panthfinder S and planning to install a JVC Navigation system. I would like to find out where is the speed sensor, and parking brake wires located and colors. Any help would be appreciated.

Thanks.


Return to “NAV/GPS/Audio/Electronics”