Rear camber kit for a 2011 LE 4x4??

[Sanfer]

where can I get it?
Is it really necessary?
In the last alignment service the numbers were TOO close to red...and no possible to make more adjustment...
Thanks for give me a hand on this.

[azaizai]

Well you can either get the Nissan ones from Nissan (or online vendors) or get an aftermarket company's version.

SPC is the company I usually go for and any local parts house should have them.

Or just search for "2011 Pathfinder rear camber bolts" and click on shopping.

[Thupertrooper]

Sticky on Nissan kits

http://www.thenissanpath.com/viewtopic.php?t=11989

[smj999smj]

Rear suspension should already have the eccentric adjustment bolts from the factory. The camber/caster bolts from Nissan won't be any different from what you already have on your vehicle. Is the suspension stock or modified?

[Sanfer]

It seem I got it wrong and the stock eccentric rear bolts do the job ok, which is not the case for the front suspension.

Thanks to all.-

[Sanfer]

I got this info today from 4x4 Parts. Anyone familiar with it?

[Thupertrooper]

Can you let us know if your alignment is fixed with those thanks

[Sanfer]

Thupertrooper, I haven't order it yet looking for any feedback before that.

Mike V from 4x4Parts told me "these will give you ability to adjust your alignment by rotating sleeves in your upper a arms of rear suspension"

I haven't speak to him yet after receiving his email showing this new (?) kit.

This is the link: http://www.4x4parts.com/i-22756999-rear ... hings.html

[Sanfer]

FYI
This is it!
Message from 4x4Parts:
"You originally ordered lower a arm camber alignment kit which is the same as your stock lower a arm camber alignment kit.
From what I understand you are looking for ability to get more alignment range then what you get with your stock lower a arm camber bolts, by installing upper a arm off-set bushings you will be able to get additional alignment for rear end if you are having problems getting rear end aligned in your R51 Pathfinder."

[Thupertrooper]

Thank you for the info