Which upper control arms?

Topics relating to Lift Kits, Suspension, Steering...

Moderator: volvite

ccking85
Posts: 7
Joined: Mon May 13, 2013 7:01 pm
Location: North Carolina

Which upper control arms?

Postby ccking85 » Mon Jun 13, 2016 6:52 am

I'm in the process of finally upgrading my suspenion on my pathfinder. I finally pulled the plug and ordered an OME kit. I was thinking about upgrading my UCA too. There and a few options out there and was wondering what everyone recommends. Thanks for the help.


User avatar
Thupertrooper
Posts: 674
Joined: Sat Jun 15, 2013 10:17 am
Location: Mesa,AZ

Postby Thupertrooper » Fri Jul 08, 2016 4:55 pm

Try PRG and thren Nisstec last 4x4.com

Remember anything on a frontier and xterra similar year will fit.

silver x0ne
Posts: 31
Joined: Thu Apr 01, 2010 10:45 pm
Location: DFW, TX

Postby silver x0ne » Fri Aug 12, 2016 12:48 pm

Knowing nothing I bought some of the SPC arms and I like them a lot. I had some caster problems after installing coil overs up front and was able to get everything into perfect alignment once they were installed. The adjustable ball joints are awesome. Past that I can't really comment much.. everything functions really well at this point and I just got done taking it on a 50 mile off road trail with great results. Install was incredibly easy.. I didn't have to cut the bolt by the steering shaft either.


Return to “R51 Suspension and Steering”