LT Custom Control Arms And Drop Spindles

[forgottenzone]

I am having all of my 8 Control Arms Custom made to replace all of the OEM Control arms With Much Lighter and Stronger Verions.
The lower control arms will be boxed control arms made out of chromoly metal.
The Upper control arms will be also made out of Chromoly metal but tubing.
All Front and rear.
Also I am getting 2 Inch dropped Front and Rear Spindles that will be made out of 1 peace Aluminum.
They will work for 4X4 and RWD.
The 2 inch drop will keep my Pathy where she is now and it will allow me to use Stock hight Springs. which will give me a better ride then what I have now.
The H&R Springs, Pathy Bottoms out to easy with them.
The Front Lower Boxed Control Arms are already Finished.
They weigh 4LBS without Ball Joint VS 12lb that OEM ARMs weigh.
Front Control Arms and Spindles will work for all 05-12 Pathfinders.
they also work on Frontiers, And Xterras.
The rear Control Arms and Spindles will work only for 05-12 Pathfinders.

Left Is Chromoly, Right is Stock.

[Thupertrooper]

I follow this guy on IG builds Titans mostly.
Caught my eye when he made a kit close to mine that was roughly 7" wider.

[Thupertrooper]

If you want to lose weight on the Pathy get rid of those seats lol drivers weighs like 200lbs alone

[kevinthefro]

I want those LCAs.
But I'm confused. The ball joint mount is angled up, which will be good for preventing ball joint bind at full droop, but your ride is lowered, not lifted.
So I'm confused.