Thought I should give the group a quick update
As of today
I have ordered all of the necessary parts and they will be on the way.
I am basically rebuilding my entire front and rear suspension.
Here is what im replacing
Front:
Lower Control arms
Moog Camber/Caster Bolts
Moog Quick Struts with a 2 inch lift spacer
Rear:
Lower Control Arms
Moog Camber Bolts
PRG Sway Bar End Links (you gotta get these!)
Some of my parts have arrived this week ( see post below)
I saw that someone mentioned that the rear didn't have adjustable camber bolts for the control arms. I did some investigating and I found something interesting:
Facing towards the front of the vehicle (non adjustable bolt)
Facing the rear of the vehicle (adjustable camber bolt)
Is this normal to have on rear lower control arms? I usually see either both camber bolts or both non adjustable bolts. Not 1 of each.
I mentioned im getting PRG end links. If you do a lift, you need these!
Here is one installed on the drivers side on my pathfinder.
These end links are length adjustable. You can adjust them so they can better handle your vehicle setup.