SuperChips

The Gas and Diesel Engines - VQ40De, VK56DE, YD25DDTi, V9X, Transmission, Transfer Case, Oil, Differentials, Axles, Exhaust...

Moderator: volvite

Nick@Nite1988
Posts: 5
Joined: Tue Jun 10, 2014 3:19 pm
Location: United States

SuperChips

Postby Nick@Nite1988 » Tue Jul 15, 2014 12:21 pm

Hey all, So I have a 05 Pathy with exhaust and a K&N Intake. I want to get a little more out of my engine... I was looking at some Chips/tuners for the pathfinder but I don't know which one I want to go for. What do some of you use and or recommend?


User avatar
akley88
Posts: 449
Joined: Sun Mar 03, 2013 1:45 pm
Location: United States

Postby akley88 » Wed Jul 16, 2014 9:01 am

from what i have seen the majority of people have used the bully dog gt tuners

User avatar
disallow
Site Admin
Posts: 2820
Joined: Wed Aug 13, 2008 9:02 am
Location: Winnipeg, Canada

Postby disallow » Wed Jul 16, 2014 9:10 am

I have a Superchips. Its not as nice as the BullyDog, and the BullyDog also has a Trans Temp gauge, whereas the Superchips does not.

t

jman9895
Posts: 89
Joined: Fri Mar 21, 2014 5:53 am
Location: MA/NH Border

Postby jman9895 » Wed Jul 16, 2014 11:36 am

disallow wrote:I have a Superchips. Its not as nice as the BullyDog, and the BullyDog also has a Trans Temp gauge, whereas the Superchips does not.

t
Does it get that info from the datastream or do you have to tap/install a sensor for it?

User avatar
disallow
Site Admin
Posts: 2820
Joined: Wed Aug 13, 2008 9:02 am
Location: Winnipeg, Canada

Postby disallow » Wed Jul 16, 2014 11:50 am

The bullydog apparently pulls it off of the CAN using j1939. It must be a monitored parameter already.

No extra sensors required.
Last edited by disallow on Wed Jul 16, 2014 12:47 pm, edited 2 times in total.

jman9895
Posts: 89
Joined: Fri Mar 21, 2014 5:53 am
Location: MA/NH Border

Postby jman9895 » Wed Jul 16, 2014 11:53 am

nice


Return to “R51 Engine, Driveline and Powertrain”