Show it off!! Recent pics of your Pfinder, let's see 'em!

[triplesnake]

Some great pics recently of pathfinders being used to their potential. Good stuff!

We finally got ours dirty. Here is the wife splashing through a creek crossing at our hunting lease. That sand can get pretty soft. The rancher's son got his F150 stuck in the same spot a couple of weeks before. No problem for the Pathy.

[anderson07]

[/img]

[azaizai]

Nice! Love the RTT!

If you ever felt the drive to write up a little review/info post on it sometime I'd love that as well!

[Touchdown]

+1 on the camping trip and RTT!!

[Thupertrooper]

Bored at home needed something to try out the new front suspension
Got some radflos with 700lb springs and long travel uca and lca



Carnage from wheeling on Payette Draw near Payson AZ harsh 4x4 trail







So decided to remove ugly bumper skin so now i have to make my custom bumper

[NmexMAX]

By long travel LCA's, do you mean you went with the Titan swap?

Never seen any LCA's for ours except for T-swapped units and that last picture looks like that (T-swapped).

[Touchdown]

Was watching this thread for a response...

Maybe there's a way to just swap the LCA's from the Titan?!

[Thupertrooper]

Im actually 1" wider then a titan
A titan swap is 3" wider then stock
So i em 4" wider then stock
I will be selling this setup to a near by frontier and getting a 7" wide.

But to answer you guys you can do a titan swap we have the same setup as armadas titans frontiers and xterras
Only difference is the diffs from v6 and v8 and cvs

[Touchdown]

Cool!

So which vehicle did you cannibalize to get the 4 inches of width (and I'm assuming more travel)???

AND what pieces did you use? (Just UCA/LCA?)

[Thupertrooper]

Cool!

So which vehicle did you cannibalize to get the 4 inches of width (and I'm assuming more travel)???

AND what pieces did you use? (Just UCA/LCA?)

Made a Thread on just questions on my suspensios so we dnt flood this thread
http://www.thenissanpath.com/viewtopic. ... 7154#77154

And to answer your question they are stock Pathy lowers that are extended and boxed the uppers are just extended and gusseted.
Stock ball joints for easy and cheap repair poly bushings for quiet and smooth suspension travel.
Buddy of mine made them since he has access to lazer cutter and tig welders

[Thupertrooper]

Post more pictures guys

[SETI20]

So your front track is that much wider than the rear? I can't believe that's legal there!

[Thupertrooper]

lowrider Pathy lol

IMG_5317 by , on Flickr

[CAMO]

[KirillM]

Hi from Belarus