Rear springs

[180sx]

Hello Pathfinder Owners. I'm looking to find out what the rear spring dimensions are on the R51. I mainly need inside diameter, but outside diameter or coil width would also be great. Thanks!

Jose

[pawjr74]

The inside diameter is right at 4 5/8 inches.

[180sx]

Hey thanks so much! That really helps a lot!

Thanks again!

Jose

[180sx]

One more question than I'll leave it alone.

What is the height of the stock rear spring? Thanks again!!

Jose

[pawjr74]

That's an OME 2 1/2" lift rear spring in the picture so I can't get that measurement for you. Sorry.

[goblue90]

One more question than I'll leave it alone.

What is the height of the stock rear spring? Thanks again!!

Jose

Here are the OD and height measurements from one of the stock rear springs from my '05 LE (sorry, I forgot to measure I.D.):

O.D. - 6 1/16"



Height - 16 1/16"

[180sx]

Thanks a lot guys! I may end up using these springs for the rear of my R50 when I lift it with an SFD (in the future sometime). I know someone else used WJ springs (which has the same ID as the R51 spring), so I wanted to open up options. Thanks again!

Jose