Help needed TODAY with trailer brake wiring

[Clay350]

Hey guys,

I cant find for the life of me the connections for the 7 pin connector and where the wires go upfront for the break controller. I have installed brake controllers on a couple vehicles and usually I find a digram somehwere to do this. I am doing my airlift 1000 airbags today and wanted to do my E-brake with 7 pin connector while im doing the air bags. I do not have the Nissan 7 pin kit just a good 7 pin connector. Any help would be appreciated.

[volvite]

Clay,

I was doing my airlift today and found a surprise that the previous owner had done it already for me. He/she also had a 7 pin kit installed. Here is where they connected into the hitch lighting...



You can see he removed the blue wire from the black plug. He then tapped into the 4 pin which is the gray plug and then put in his own 7 pin..





Hope those help. I'll see what I can find for the brake controller up front and post back here for you.

[volvite]

Clay,

Hope these two pictures help. My brake controller is just plugged into this plug underneath the dash...





Jon

[Clay350]

Hey thanks for the quick reply that did help a lot. Installing airlift right now outside in 60degree weather!

[volvite]

Clay,

Glad those pictures worked for you. Hope you get it all figured out. I've got 60 degree weather here too. Love it.