What on my 95 controls RPM Gauge

You gotta Love these old VG30E/i powered beasts, raw truck DNA to the core.

Moderator: volvite

bwd111
Posts: 1
Joined: Mon Dec 22, 2014 6:07 pm

What on my 95 controls RPM Gauge

Postby bwd111 » Mon Dec 22, 2014 6:10 pm

Reason I ask is when I turn ign to power only when I push on gas pedal the RPM goes crazy!it goes from 0-4000RPM and I hear the coil buzz that connects to distributor. Then when I start engine is sounds bad very bad until I rest the battery. And when driving the engine just dies at random times and different days power stays on engine dies. I wait a couple of minutes then it starts again sometimes I rest battery and engine starts. Ive replaced fuel pump and ing coil and module,mass and TPS sensors.So what controls RPM or why would RPM be doing this when I turn just power on. Also sure this is connect to engine dying all the time as well.


Return to “1986-1995 Pathfinder (WD21)”