just brought my Pathfinder home

[IndianScout]

I had purchased it and had to wait for them to get back from vacation..

anyway, on the drive home, I noticed this black tape covering the dash info lights and I peeled it off, I immediately see the doors ajar blinking and the oil pressure light on full time, so I pull over quickly and check the oil.

Oil was full as was all the other fluids.

I called them on the phone, he stated to me that the lights started doing this months ago and got tired of looking at it, he had the oil checked by mechanical pressure gauge and it was fine so he just put tape on the dash..

I dunno if I was more scared thinking I was going to be stuck 200+ miles from home or the fact I wasn't told..

I finished the drive home and have drove it all over the place it has the normal exhaust tick but other than that it runs like it's new..

his last statement to me was "pull the bulb out"

umm no way in hell I'm doing that, so the fun starts today..

[TheRude1]

Yea that would suck !

Glad he mentioned that

Prob just a sensor or maybe just a bad/loose/off connection. Always chk the cheap easy stuff first

Glad ya made it home, I only went about 15 mls to get mine

[IndianScout]

just checked it with a manual pressure gauge, the sensor is bad, so I stuck a business card in front of it until the new one comes in..

[TheRude1]

Cool nothing major

I got a motorcycle free once cause the guy said it had a bad brainbox and would cost $600.00 in parts to fix
I went home and put a battery in it and tadaaaaa

[IndianScout]

still driving and have put 400+ miles on the Pathy

stupid light still stays on, it's driving me nuts..

[IndianScout]

ok so I tightened the alt belt because it was squealing, dunno what I did but now the oil light will go out or come on and flicker

crazy thing..

[smj999smj]

If you've installed the new O/P switch and the light oil light is still flickering, check the wire to it for a break or short. Chances are it won't be far from the switch.

[IndianScout]

ya I bet I have a broken wire or loose connection, I'll dig into it today