Postby fleurys » Sun Feb 07, 2010 10:44 am
You need ATF with dextron 3 or dextron III. Now when you flush it from the trans drain plug, you will get around a good 5 liters... Here's what I do to facilitate the change
1) look at the oil level . if oil level is ok then you can do this procedure
2) drain the oil in a reusable container like a plastic pitcher with gradation numbers etc..
3) note the ammount you got.
4) put the same ammount of new oil in the same container and fill back.
There is more oil than 5 liters that goes in the trans, but a lot of it will stay in the torque converter.