Looking for a part identification...

Any topics related to 2005-2012 R51

Moderator: volvite

aidub
Posts: 5
Joined: Mon Apr 04, 2016 1:56 pm

Looking for a part identification...

Postby aidub » Mon Apr 04, 2016 2:04 pm

I'd like to first say that I don't have a huge knowledge of cars so please don't hate on me if this is completely obvious haha.

Anywho, yesterday I had the part completely fail on me at a hose coming in from the radiator. I'm trying to find what the name of the part is so I can see what the damage would be to my wallet when it's replaced. It appears to be part of the air-conditioner as it sits on the firewall on the left (from looking into the engine bay from the front of the car) of the engine.

Any help is much appreciated.

Thanks!

Image


User avatar
smj999smj
Site Admin
Posts: 6054
Joined: Sun Jan 22, 2012 11:13 pm
Location: Prospect, VA

Postby smj999smj » Mon Apr 04, 2016 2:46 pm

That's the union for the heater system hoses; the parts catalog simply refers to it as "hose assembly-heater." You don't mention what year you have, but I'm assuming 05-07 because you have the bleeder fitting on it, which they eliminated around 2008. Refer to part code "92414":

http://www.nissanpartsdeal.com/parts-li ... b6%3dLE%29

aidub
Posts: 5
Joined: Mon Apr 04, 2016 1:56 pm

Postby aidub » Mon Apr 04, 2016 2:58 pm

I apologize, I didn't mention the year. It's a 2005 so you nailed it ;). Thank you for identifying the part for me.

After looking at the diagram, and seeing what piece malfunctioned on my assembly, would it be safe to assume that I only need that 92414 part and not the entire assembly?

aidub
Posts: 5
Joined: Mon Apr 04, 2016 1:56 pm

Postby aidub » Mon Apr 04, 2016 3:12 pm

Nevermind, it looks like I'll need the complete assembly.

User avatar
smj999smj
Site Admin
Posts: 6054
Joined: Sun Jan 22, 2012 11:13 pm
Location: Prospect, VA

Postby smj999smj » Mon Apr 04, 2016 4:57 pm

Yeah, it's sold as an entire assembly. Cheap, too!!...not!..

User avatar
Thupertrooper
Posts: 674
Joined: Sat Jun 15, 2013 10:17 am
Location: Mesa,AZ

Postby Thupertrooper » Mon Apr 04, 2016 6:47 pm

Looks like mine started leaking right under where yours broke does only coolant run through here?

User avatar
smj999smj
Site Admin
Posts: 6054
Joined: Sun Jan 22, 2012 11:13 pm
Location: Prospect, VA

Postby smj999smj » Mon Apr 04, 2016 10:07 pm

Only engine coolant runs through this part.

User avatar
Thupertrooper
Posts: 674
Joined: Sat Jun 15, 2013 10:17 am
Location: Mesa,AZ

Postby Thupertrooper » Tue Apr 05, 2016 5:51 am

Looks like a pia $180 wow
I only found this leak looking for my a/c line leak

aidub
Posts: 5
Joined: Mon Apr 04, 2016 1:56 pm

Postby aidub » Tue Apr 05, 2016 10:28 am

Tack on another $200 in labor to have Nissan service install it. So it's looking like around $400 if you don't do it yourself unfortunately.

I'm debating on replacing it myself honestly. Do you know how difficult it is? I've looked it over and it doesn't seem terribly hard however I've never changed something like this before.

User avatar
Thupertrooper
Posts: 674
Joined: Sat Jun 15, 2013 10:17 am
Location: Mesa,AZ

Postby Thupertrooper » Tue Apr 05, 2016 1:12 pm

Looks like nothing but hose clamps. The firewall ones look like the hardest part to put back on mostly.

Dlsgap
Posts: 3
Joined: Sat Dec 08, 2012 4:08 pm

Postby Dlsgap » Tue Apr 05, 2016 3:35 pm

Mine JUST did this as my wife was pulling in the driveway after work.
Has anyone done this repair yet? is it a huge pita?

So is the 92414 the entire assembly?
with three babies at home during the day that i have to care for after working nights i may just bite the bullet and have nissan do it.

aidub
Posts: 5
Joined: Mon Apr 04, 2016 1:56 pm

Postby aidub » Tue Apr 05, 2016 3:48 pm

Yea, 92414 is the entire assembly. You unfortunately can't buy just that part. Tried calling junk yards and most of them won't part out engine components so it looks like you either have to buy it online or from Nissan. After S+H it's $20 cheaper to buy it online however you'll either need to install it yourself or take it to a mechanic.

User avatar
Thupertrooper
Posts: 674
Joined: Sat Jun 15, 2013 10:17 am
Location: Mesa,AZ

Postby Thupertrooper » Tue Apr 05, 2016 5:57 pm

I will most likley do this job myself just not right now as its not pouring out i was actually looking for a/c line leaks and traced that one thinking it was but just heater.

If i do it soon ill share my procedure

User avatar
smj999smj
Site Admin
Posts: 6054
Joined: Sun Jan 22, 2012 11:13 pm
Location: Prospect, VA

Postby smj999smj » Tue Apr 05, 2016 9:14 pm

I had an A/C leak on my 08 at the expansion valve to the rear system. You can see it unless you pull out the whole, rear side panel. I was replacing the rear blower fan amp and noticed the expansion valve covered in green dye.

As far as used heater valves, I wouldn't recommend installing one if you could get it. The plastic becomes brittle due to time and the heat so the used part probably isn't in that great of shape, either.


Return to “R51 General Chat”