Ignition Cool

The Gas and Diesel Engines - VQ40De, VK56DE, YD25DDTi, V9X, Transmission, Transfer Case, Oil, Differentials, Axles, Exhaust...

Moderator: volvite

wrongler
Posts: 4
Joined: Tue Jul 16, 2019 6:36 pm

Ignition Cool

Postby wrongler » Fri Jul 26, 2019 8:58 pm

Any Nissan techs out there? Changing the coil packs on my 07 Pathfinder with the 4.0L V6 and the nutsert? for the #2 coil pack bolt is spinning in place. Do I just have to replace the valve cover or are there any tricks to get the bolt out? Thanks.


User avatar
smj999smj
Site Admin
Posts: 6054
Joined: Sun Jan 22, 2012 11:13 pm
Location: Prospect, VA

Postby smj999smj » Sat Jul 27, 2019 10:11 am

Well, here's the way I look at it.. If the nutsert is spinning in the valve cover, already, and you are able to get the bolt out, you'll still have to replace the valve cover because you'll end up with the same problem if you were to try and install the bolt into the "spinning insert." You mind as well just replace the valve cover.


Return to “R51 Engine, Driveline and Powertrain”